A small new motherboard from Supermicro has been spotted on the shop-shelves, the Supermicro A1SA7-2750F. This tiny board is feature packed with a total of 17 SATA3 6GB/s ports and is a totally passive cooled System on a Chip (SoC) supporting up to 64GB memory. Sparked your interest? Here are the rest of the details.
The A1SA7-2750F has an Intel Atom C2750 at it’s heart with 8 cores/8 threads. It is a compact and fanless motherboard operating at 2.4GHz, or 2.6GHz with Turbo. With 4 RAM slots and support for 16GB modules, this board supports up to 64GB ECC/non-ECC DDR3 with a speed of up to 1600MHz.
The 16 blue SATA ports are powered by a LSI 2116 SW 6Gbps SATA/SAS controller and it has an additional yellow SATA port at the top that is controlled by the SoC itself. That is an amazing amount of on-board SATA ports for such a small form factor. The motherboard also has a direct on-board USB port and a SATA DOM power connector. At the bottom we see the single PCI-Express 2.0 x4 connector (in x8 slot).
The rear IO panel has two USB 2.0 ports and two normal Gigabit Ethernet RJ 45 ports, but it also features a dedicated port for the Intelligent Platform Management Interface (IPMI) and a VGA D-SUB port.
Not only does this Supermicro motherboard have 16 SATA ports, it also comes bundled with cables for them all. That is a big bunch of cables in the box, but other then that and the manual it doesn’t look like many accessors are supplied.
The Supermicro A1SA7-2750F was priced at 66,980 yen including tax, that’s roughly £390. It isn’t the ordinary form factor motherboard (21.08cm x 17.02cm) and won’t fit in cases with ATX mounting. It’s designed for 1U 19″ rack systems, but one could of course just mod the case to fit. The board gets power from a 12V 8-pin and 5V 4-pin connector.
Thank you Akiba PC Watch for providing us with this information.
Image courtesy of Akiba PC Watch.