Silverstone Tundra TD02-Slim AIO Cooler Review


Installation the fans was an easy task, simply use the eight included screws to fit them directly to the frame of the radiator. There are special short screws included for this job, as they’re very slim fans, but should you wish to use standard 120mm fans, you’ll also find a set of standard length screws to facilitate them.

The backplate is universal, so it works on all supported socket types. Simply pop the retention screws through the appropriate holes and you’re good to go.

Add the plastic spacers on the other side, then add your thermal paste.

Then simply attach the pump using the included thumb screws, although you can use a screwdriver if required. Overall, this is a quick and pain-free installation process.