Building a PC can be a fairly simple task, most of the parts to together in a format that’s no less complex than a Lego set. Of course, picking the right components, putting them together in the best way and getting the best performance out of them, that’s where a little more effort is sometimes needed. One thing that can be quite easy is picking a bunch of great hardware, but keeping it running cool, quiet and efficiently, that’s a whole different ball game. Your chassis comes with fans, most likely that your CPU cooler does too, be that a water or air cooling solution, your GPU no doubt has fans and the list goes on. One thing you’ll be familiar with about fans, other than the fact that they blow air, is that they can often get a little noisy, especially when your system is running a little hot.
NZXT had great success with their GRID fan controller, a simple device that hooks up multiple fans and gives you control over their RPM via some desktop software. The new GRID+ V2 follows the same concept, but this time the unit is even better than before. Being able to take control of your fans is a great addition to your setup, as it allows you to turn them down to a whisper when watching movies or performing less intensive tasks. However, when you’re gaming, overclocking and more, being able to dial-up the fans to a suitable level gives you more control over the airflow, noise and hopefully the performance of your system.
Equipped with six fan headers, the Grid+ V2 should be able to drive all the fans in your system, and you could always invest in a couple of Y-splitters if you need to connect more per-channel. With up to 30W maximum output, the V2 shouldn’t have any trouble powering a whole bunch of fans.
The packaging is nicely designed, with just a simple image of the product and some branding on the front.
Around the back, we’ve got a slightly more detailed run down of the CAM software that is used to control the fans.
In the box, you’ll find a comprehensive setup guide. Honestly, it’s all pretty self-explanatory, but it certainly never hurts to have a helping hand.
In the box, you’ll also find a good selection of cables that you’ll need to set up the Grid+ V2. This includes a USB cable, Molex power cable, some handy cable ties and two 3-pin female to 4-pin/3-pin Y extension cables.
Finally, we’ve also got two dual-lock 3M velcro pads with adhesive backs.