Kingston has a long line of storage options for about every usage you could have. Today I’m taking a look at the SSDnow M.2 SATA Solid State Drive with a capacity of 120GB.
The M.2 modules are also known as the Next Generation Form Factor (NGFF) and these thin and compact modules save space in small and embedded systems, ultra-thin devices, or it will just fit snuggly into your motherboards M.2 slot in your desktop system. The caseless design allows easier integration as well as keeping the weight as low as possible; a big factor when used in Ultrabooks and similar devices.
The 2280 module (22mm width, 80mm length) supports advanced garbage collection, wear-levelling and TRIM to keep up the performance over the entire lifetime of the drive; so we should see very stable performance in our tests on the following pages. S.M.A.R.T. is also supported for peace of mind and health monitoring.
At the heart of the drive, we have the Phison PS3108-S8 controller and Kingston equipped this module with a 2GB Nanya NT5CB128M16HP-CG buffer. The NAND chips used are 32 GB Kingston FA32B08UCT1-BC and there are two located on each side of the module.
A drive designed for integrated and portable systems has to be energy-efficient as well. The Kingston M.2 SATA drive also features the DevSleep function that we see more and more drives incorporate. It is relative new to the SATA specifications and is an efficient power management option to minimise power consumption and extend battery life.
For the event that you’d ever run out of battery and your device shuts down unexpectedly, or maybe it just crashes, it features firmware-based power loss protection to maintain the data integrity. This allows the drive to recover in the event of an unsafe shutdown.
The Kingston M.2 SATA drive doesn’t stop there and also supports Intel’s SRT that can combine the capacity advantage of HDD with performance improvements of SSD in dual-storage configuration. Increased peace of mind is added by the free technical support and three-year warranty.