Ivy Bridge and changing the Thermal Interface Material

by - 9 years ago


Ivy Bridge offers the best clock per clock performance of any consumer processor to date and exceeds Sandy Bridge by 5 to 15% in performance at equivalent speeds. Yet this revolutionary new architecture from Intel disappointed some enthusiasts, with its high temperatures and inability to clock as high as Sandy Bridge.

Ever since the first reviews came out speculation has been thrown back and forwards about whether removing the integrated heat sink (IHS) and changing the thermal interface material (TIM) on Ivy Bridge unlocked “K” processors would result in better temperatures and higher clock speeds. The logics behind this argument stem from the fact that Ivy Bridge is capable of higher clock speeds than Sandy Bridge once temperature can be tamed – as shown by an i7 3770K recently reaching 7.1GHz under LN2. Add to that the fact Ivy Bridge actually produces less heat, due to a lower TDP. Although the lower TDP doesn’t translate into lower temperatures because of the high density of transistors in the architecture that make heat dissipation more troublesome.

We want to offer something quite simple for the enthusiast world to see, a answer to the following question: What happens to temperatures when you change the thermal interface material on an Ivy Bridge processor? We won’t get into our testing methodology right away, because we will dedicate a whole page to that next.

One thing we want to introduce straight away is a warning-come-disclaimer about what we are going to attempt. By removing the integrated heat sink from an Ivy Bridge processor you void the warranty, even if you have purchased an Intel Performance Tuning Protection Plan. So we encourage you to know and understand the risks and consequences associated with what we are doing if you attempt to do it yourself. There is a high risk ( especially if you don’t know what you’re doing ) that you could brick your CPU during the process, since a razor is required to remove the IHS.

Right away we want to point out that this isn’t an Ivy Bridge review. Nor is this an Ivy Bridge vs Sandy Bridge overclocking guide or performance comparison. This is an Ivy Bridge modification results guide,designed to show you what temperatures improvements, if there are any, to expect after changing the TIM.

As this is written testing is yet to be started, so we are quite excited about the results to come. Our predictions are that by doing this we will hopefully be able to shave off 10 degrees celsius from overclocked load temperatures. As a result we expect most users would be able to push there Ivy Bridge CPUs that bit further, but obviously results will vary from system to system.

We would also like to say a massive thank you to Intel for making this testing possible.

Article Index

  1. Introduction
  2. Testing Methodology
  3. Test System
  4. Stock IHS Test Results
  5. Tips for Removing the IHS
  6. Modified IHS Test Results
  7. Stock IHS vs Modified IHS
  8. Conclusion
  9. View All

Author Bio

10 Comments on Ivy Bridge and changing the Thermal Interface Material

  • what effect did having it run at a lower temp have on power consumption and what effect would it have on the potential life span of the CPU? while agree that this is a mod for the most extreme of modders, i still think Intel have been irritatingly cheap by putting in a poor quality TIM.

    • Avatar Ryan Martin says:

      Effect on Power Consumption is a whole different matter, that involves changing volts and clock speeds and what not – this article was just designed to be an insight into temperature reductions only with equivalent BIOS settings. But yes it is quite irritating, according to some pro-modders thermal paste can only ever be 1/15th as efficient as the fluxless solder used on Sandy Bridge CPUs

  • Why those tightwad Intel geniuses. You’d have thought they would’ve used a better quality TIM for the prices they charge. If they ever decide to use higher grade stuff I hope they don’t go under by buying a couple of gallons for a few extra bob.

    • Avatar Numnut says:

      “The higher grade” stuff you mention is actually a soldering process that was dropped from the production process, the process to solder takes up to 2 hours to perform in a continuous production environment !!

  • Avatar Why says:

    no liquid metal?

  • Avatar alch says:

    Great idea… Putting white text in the end of the yellow bar..

  • Avatar Greg Zeng says:

    “Fixing Ivy Bridge CPU temps: IHS removal” Youtube tutorial mentioned by the OP showed another reason for poor Intel quality control: poor Intel placement of the IHS.
    The one ‘bad’ CPU was fixed by removing Intel’s poor quality control, making all CPUs perform equally.

  • Avatar sdfff says:

    Did you try any wihout the IHS at all?

Related Posts