I’ve taken a look at quite a few of Inateck’s products so far, and I have yet to be disappointed. They are taking known concepts but improve on them with a twist of some sort. They have done exactly that again with their new FE2007 Tool Free UASP USB 3.0 HDD Enclosure with built-in and powered 3-Port USB 3.0 Hub.
Thanks to the power of the USB Attached SCSI Protocol (UASP), the FE2007 is able to utilize the entire USB 3.0 bandwidth and provide excellent transfer speeds.
You connect the enclosure directly to your system via the micro USB port on the one side of the enclosure and that is all you need to do. The enclosure is both tool-less and driverless. Another bonus feature is the ability to power down the inserted drive when you don’t need it. Save on your power bill and save lifetime on your drive.
There is one problem that you often run into and that is the problem with too few USB ports. This is especially the case on notebooks and compact systems that generally have fewer ports, but not exclusively. Inateck added a three-port USB 3.0 hub to the enclosure and increases the functionality of this tiny device a lot.
There is a second USB cable included that isn’t for data transfer, but rather to provide extra power to the connected devices. This allows you to use more power hungry devices at the same time and charge mobile products faster.
The top cover slides off without the use of much force, at the same time it still stays where it should be when closed. The enclosure has the same width internally as your 2.5-inch drive, so all you need to do is slide it in until it’s plugged into the SATA connector and close it again.
Inateck’s FE2007 can take 2.5-inch drives with a height of up to 9.5mm, making sure that you’re also able to mount the thicker drives.
Inateck also included a foam pad with the package that helps to keep a thinner 7mm drive in place inside the enclosure. This is especially useful when you take the enclosure with you on the go.
I’d also like to point out that I really like how Inateck is packaging their products. For the most part the package is just a brown box with a sticker. While this might be boring, no one actually looks at the box after you got it and it’s much better for the environment as well as saving production costs and machine maintenance that ultimately would end in a more expensive products. Well done.