ID-Cooling Hunter VC-Twin CPU Cooler Review

by - 7 years ago

«»

Installation


ID Cooling tend to use the same mounting kit for many of their coolers, and the VC-Twin is no exception. The durable universal backplate drops into place easily enough, and you simply slot the required screws through the appropriate holes.

DSC_6010

Add the four washers and thumbscrews on the other side, and everything looks very securely into place.

DSC_6011

Four more thumb screws hold the Intel or AMD bracket in place easily enough.

DSC_6013

Then two more to mount the cooler on the bracket. You can do these with your fingers if the motherboard doesn’t have larger VRM cooling to blocks your hand, but if not, you can use a screwdriver.

DSC_6014

It certainly looks impressive on the motherboard and while it is quite large, it’s not overly tall, so should be suitable for most chassis types. In this orientation, you can easily fit larger ram modules. Turn it 90 degrees and you’ll still fit standard profile RAM easily enough also.

DSC_6017

Article Index

  1. Introduction
  2. A Closer Look
  3. Installation
  4. Test System and Methodology
  5. Performance
  6. Final Thoughts
  7. View All

Author Bio

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES