We see all kinds of weird and wonderful products here at eTeknix HQ and while I’m no stranger to mobile devices or even wireless charging devices, this one is marketed with a twist that really caught my attention. The Qi Wireless Charger from Fusion is technically like any other Qi wireless charging system, so if you have a Qi compatible device, you can pop it on the base it provides, charge it and you’re good to go, review done, see you later.
OK, so there’s a lot more to it than that, a few add-ons that offer extra functionality, as well as some swish marketing that make the Fusion suitable for the visually impaired. I don’t know about you, but I’ve had a fair few fights trying to line up either end of a USB cable, I doubt I would fare much better if I had impaired vision; we’ll get to how it helps with this in a moment.
- Dynamic Power Limiting™ (DPL) for USB and Limited Source Operation
- Foreign Object Detection (FOD) in WPC mode
- Fusion OTR™ technology
- Ultralight weight & slim design only 55*78*6.5 mm
- Ti (Texas Instruments) smart dynamic & overcharge detection
The packaging is pretty straight forward, and with that bright pink cover it certainly stands out! You’ll also notice the packaging comes with braille print on the front, as well as a sticker which reads “official sponsor – Taiwan guide dog association.”
In the box, you’ll find a cut-out guide to aid with installation although anyone who’s half adept at sticking something to a flat surface likely won’t need it. There’s a large white sticker with high-vis pink letting and braille on the top, a 3M sticky pad, USB cable, two cable routing fittings with sticky backs and two screws; everything you need to install the system in a wide range of configurations.
The main power delivery unit is slim and nicely designed, so much so that it’ll look nice and tidy on your desktop as a direct “put your phone/tablet on this” style device. However, using the 3M pad you can mount it on the underside of a desk or table surface. Again, taking note that there is a little braille on the edge to show where there Micro-USB port it.
On the underside, there’s a nice flat surface, so it should be nice and easy to mount under a desk or table using that 3M pad. There’s also two screw holes, perfect for those that prefer a more permanent mounting solution.
The previously mentioned Micro-USB port on the end. This is for the main power input, you can connect the included USB cable to a USB plug, computer or any other compatible output.
A nice bonus is the Qi add-on, which can make any device wireless charging compatible. Of course, the grand irony here is that it comes with a cable, which seems silly, but there’s merit to be found here and I’ll get to that in a moment.
On the underside, you’ll find a gel-like surface which is tactile and will stick to glossy surfaces such as the back of a phone, SatNat, tablet, etc.
If the Micro-USB connector isn’t much good to you, a dual connector Apple adaptor is also included!