Cooler Master V750 Modular Power Supply Review

by - 6 years ago

«»

Fan Speed


When testing in a power supply laboratory it is difficult to take fan noise readings as the noise from the Sunmoon test equipment and air conditioning corrupts everything. The next best thing in our circumstances was reading off the fan speed with a tachometer to get an idea for the noise. The ambient temperature during testing held constant at 22 degrees, with 1 degree of variation. Each power supply had a consistent time period of 5 minutes to stabilise between each load scenario. 

In my experience, the following general relationships apply between noise levels and fan speeds, though it can vary greatly between the type of fan used.

  • Below 800 RPM – Inaudible/Silent
  • 800 to 1000 RPM – Barely audible
  • 1000 – 1200 RPM – Audible but still quiet
  • 1200 – 1400 RPM – Moderately noisy
  • 1400 – 1800 RPM – Noisy
  • 1800 RPM or higher – Intolerable

Cooler Master V750 fan speed

Pay close attention to those numbers on the left, as while it may look like the fan speed ramped up a lot at higher loads, it really only changed by 20RPM, which is as close to saying the fan speed was a constant 570-ish RPM, making is incredibly quiet and certainly inaudible for anyone that doesn’t have their ear pressed up against it.

Article Index

  1. Introduction
  2. A Closer Look - Exterior
  3. A Closer Look - Interior
  4. Test Procedure
  5. Efficiency, PFC and Voltage Regulation
  6. Ripple Testing
  7. OPP and Max Wattage
  8. Fan Speed
  9. Final Thoughts
  10. View All

Author Bio

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES