Linksys is one of the biggest manufacturers of routers and network equipment in general, but that doesn’t mean that there isn’t room for a more devices as well as room for improvement on the current lineup. Linksys’ new modem router is the X6200 and it is a combined cable and ADSL/VDSL dual-band WiFi model.
The Linksys X6200 supports pretty much any connection you can have from static RJ45-based over cable to DSL connections and I wouldn’t be one bit surprised if you could use the included USB 2.0 port to attach a 3G/4G/LTE modem too. While it can connect to pretty much any type of internet connection, the built-in cable modem might be the selling point for this router. The internet connection speed has gone up and up, but a lot of cable modems lack the capability to handle the fast speeds your provider is selling you, which in return means that you’ll get a worse experience than you should.
“There is a lack of knowledge when it comes to cable modems. Consumers have cable modems or gateways that don’t match the cable broadband subscriptions they are paying for – thus getting slower speeds and frustrating experiences,” said Justin Doucette, director of product management, Linksys.
The Linksys X6200 isn’t the fastest wireless router, but the speeds of 300Mbps on the 2.4GHz band and 433Mbps on the 5GHz band should be sufficient for any internet usage. The modem router also features four RJ45 LAN ports for that direct Gigabit Ethernet connection that will provide you with the best connection. As previously mentioned, the X6200 also features a USB 2.0 port that can turn your USB drive into a network attached storage device.
The new Linksys X6200 modem router will be available in March 2016 for an MSRP of £79.99 and also has more advanced features such as parental control and guest access.
One VDSL/ADSL2/2+ port, Annex A – RJ-11 port
One Gigabit WAN port with auto MDI/MDIX sensing (RJ-45) for Router functionality
Four Gigabit Ethernet ports
One USB 2.0 port
Supports VPN pass-through with IPSec, PPTP, and L2TP
Supports logging for incoming and outgoing traffic
DHCP server for LAN
Supports Universal Plug and Play (UPnP)
IPv4/IPv6 dual-stack support
DSL Modem supports ITU G992.5 ADSL2+ Annex A, L, and M and VDSL G.993.1 and ITU G.993.2 standards
At the same time as Linksys introduced us to this new modem router, they also announced an expansion of DD-WRT support among their existing routers. The support now includes the WRT1900AC, WRT1200AC, and recently released WRT1900ACS Dual-band Gigabit Wi-Fi routers.
TP-Link were recently in the news as the company behind Google’s fancy new OnHub router, but they’re also working on their own products. The latest which just has been released is the AC1900 Wireless Dual Band Gigabit VDSL2 Modem Router, the Archer VR900. The Archer VR900 offers a versatility of connection options, making it suitable no matter which type internet connection you have. At the same time, the VR900 offers great speeds with its AC1900 wireless signal as well as great coverage thanks to beam-forming technologies and three external antennas.
For maximum flexibility, the DSL and WAN input on the TP-Link VR900 support VDSL, ADSL, fiber, and cable connections. You can even use it for with your 3G and 4G dongles when connected to the built-in USB 3.0 and USB 2.0 ports.
The Archer VR900 utilizes the latest 802.11ac wireless standard to deliver data at speeds of up to 1900Mbps. Simultaneous dual-band Wi-Fi provides excellent stability and eliminates wireless interference by transmitting and receiving on both 2.4GHz band and 5Ghz bands. You’ll get up to 600Mbps via the 2.4Gbps band and up to 1300Gbps via the 5GHz band. The modem router also has four Gigabit Ethernet ports for the best possible and wired connection.
The Archer VR900 is built around a 1GHz processor that should deliver enough power even for data-intensive tasks. No need to worry about speed caps because you’re using a lot of connections at once. Connect all of your network-dependent devices and let the VR900 balance the load to avoid bottlenecks at the processor level.
Nelson Qiao, assistant general manager at TP-LINK UK Ltd, says, “As the foundation of your home network, choosing the right router is an important decision, complicated by the various connection types. The VR900 takes the guesswork out of getting the right type of router so customers get the latest wireless features for high performance networks now and in the future, even if they change ISP.”
Over the last couple of years the internet has been going through a radical increase in speed and with some connections passing well over the 100Mbps mark, many people are now looking for the next generation of routers that can keep up with the high-speed connections that are on offer. As part of the connection process, every ISP (Internet Service Provider) tends to provide us with their own branded routers such as BT’s ‘Home Hub’ and Virgin’s ‘Super Hub’ (in the case of the two leading Internet providers in the UK); but let’s be honest, whilst they all claim that their wireless router is the better than everyone else’s – they’re not necessarily the best.
When I took a look at Netgear’s R6300 Wireless AC router back towards the start of the year, the performance that I experienced both on the local network and through the internet was far superior to my BT Home Hub that I was provided with – especially when I saw my connection speed to the internet go up by around 5Mbps. This is generally the same story across the board for many people. We are on the whole demanding more from our wireless routers and the ISP provided equipment is not matching our needs, so it is soon being replaced by after-market alternatives that have so much more to offer. Netgear are one such brand that is considered by many. Having been one the of the industries leading infrastructure manufacturers for many years and the consumer level products have been a major part of their business model, with high customer ratings and renowned reliability proving they are one of the best out there.
As the internet has grown to be faster and faster, Netgear have been pushing to come up with a router that not only meets the demands of today’s heavy users, but with features that are ready for the next generation of wireless devices. After many months of R&D (Research and Development), towards the start of this year, a line of dual-band Gigabit wireless was brought to market and the R6300 was one of these. Delivering super fast, dual band wireless with speeds of up to 1300Mbps across an AC connection it has soon become one of the best routers on the market. The user interface also saw a massive overhaul with all the connectivity and configuration options that the end-user may need – laid out in an intuitive design. Once you top off the package with USB port(s) for connecting printers and storage devices to, enabling them to be accessed across the network or remotely through Netgear’s ReadyShare functions, it becomes apparent that Netgear are offering a little more than your run-of-the-mill router.
Like many routers, Netgear’s package is simple and to the point. With little more than a DC power adaptor and a CAT5e Ethernet cable to connect the router to a modem needed, a simple pack of paperwork rounds off all the bits that you’ll need to get things up and running.