MyDigitalSSD BP5e Bullet Proof 5 Eco 240GB SSD Review

Introduction


In today’s storage review, I’m taking a closer look at a solid state drive from a company that we don’t test quite as often, but it isn’t the first MyDigitalSSD drive have tested either. The newest MyDigitalSSD drive is the BP5e that stands for Bullet Proof 5 Eco and it is a 7mm slim solid state drive that will fit into pretty much any system for a performance boost over a mechanical hard disk drive. The new BP5e series comes in capacities from 240GB and up to 960GB, and the large size is one that becomes more and more popular due to decreasing prices. I’m however taking the 240GB drive for a spin today, a perfect entry-level drive.

There were a few hints in the first paragraph such as Eco and mechanical drive replacement, so you might already have guessed that this isn’t a new flagship drive but rather a budget drive for those that wish something that is faster than a traditional hard disk drive, but don’t want to spend a lot of money at the same time.

The new MyDigitalSSD BP5e drive is built with Triple Level Cell (TLC) NAND which lowers the production cost at the same time as it increases the possible capacity on the same size, but it does come with a few drawbacks. TLC NAND doesn’t have the same endurance as MLC and the performance of long-lasting copies will be affected, how much will be shown in our benchmarks on the following pages.

The TLC NAND is made my Toshiba and it is their TLC Toggle 2.0 NAND. It is paired with Phison’s newest S10 controller (PS3110-S10) with the latest firmware for optimal performance. The two coupled should provide some great reading speeds as well as writes. The drive is rated for up to 565MB/s speeds, but that’s just when reading.

MyDigitalSSD ships each BP5e drive over-provisioned for improved Random Read/Write performance and IOPS, extended performance endurance to minimize sluggishness as the drive fills with data, prolonged drive life, added drive reliability, and low power consumption.

The BP5e in itself is a very simple drive composed of a black two-piece snap-together enclosure with a sticker on the top. Inside we find a 2/3-long PCB that only utilizes the one side with four Toshiba TLC NAND chips, the Phison S10 controller, and a Nanya 128MB DDR3 cache chip.

Feature Highlights

  • Unequaled price to performance ratio
  • PHISON PS3110 controller
  • Toshiba TLC Toggle Flash
  • Large storage capacity
  • Easy installation
  • High-speed SATA 6Gb/s (SATA III) interface – Backward compatible to SATA 3Gb/s (SATA II)
  • Withstand extreme shock and vibration
  • Support DDR3 I/O interface
  • Power management supported
  • NCQ command set. TRIM, RAID, and SMART support
  • 2-year warranty

Specifications

Packaging

The package is quite colourful and presents a full-colour image of the drive itself along with the name and what it can do right on the front.

The rear of the box has a little more information about the drive itself along with a feature list and a capacity sticker to show what model is inside.

Inside the box, we only find the drive itself and no other accessories. Not like we need a long installation guide to connect a storage drive, it’s not rocket science. A penny saved on production can make the difference in the retail pricing.

 

Crucial BX200 960GB Solid State Drive Review

Introduction


It has been almost a year since Crucial introduced the BX100 SSD and set a new standard for how much SSD you could get for your money; bringing large capacity and fast storage in the reach of more people who were dissatisfied with the slow performance of their mechanical hard disk and didn’t want to sacrifice capacity with a smaller SSD. Today I’m taking a closer look at the next step on Crucial’s goal as they just released the Crucial BX200 SSD in three capacities and at a more than good price.

The Crucial BX200 is the perfect entry-level SSD for anyone who wants to take the step away from mechanical storage, but it isn’t exclusive for those people. It could also be a great choice for people who purchase their third, fourth, or fifth SSD as you get more capacity than you are used to. The Crucial BX200 is 13 times faster than a hard drive and at the same time it is 40 times more energy-efficient. It also boots your system a lot faster and almost instantaneously on a modern operating system. Even older systems will reap the benefits of the fast boot times and it also decreases your application and game loading times significantly.

The BX200 isn’t just Crucial’s first drive to use Micron’s 16nm TLC NAND, it is the first overall drive to use Micron’s new TLC NAND. Triple-Level-Cell NAND is capable of storing more bits per cell and thereby reduce both power consumption and costs, but it does cost a little performance and endurance. The two downsides to this should however not be anything that any normal user ever will notice nor be affected by.

Crucial also used a newer controller in the BX200 over the predecessor. The new BX200 comes with a SiliconMotion SM2256 controller where the BX100 used the SM2246. The Crucial BX200 comes with a good performance rating, both when it comes to sequential and random performance. The sequential read performance is rated to 540MB/s reading and 490MB/s writing. The random performance is rated to 66K IOPS reading and 78K IOPS writing. These figures are almost all better than the predecessor, only the random read performance went down a little bit.

As previously mentioned, TLC NAND does affect performance a little bit, but not much and when used the right way it’s barely noticeable. In return, you get a great efficiency and low power consumption where the 480GB model is rated for just 150mW power draw when active, 65mW when idle, 4.6W maximum, and just 10mW when DevSleep is activated.

The Crucial BX200 comes with a mean time before failure (MTBF) of 1..5 million hours, same as the BX100 and MX200 series do. The total bytes written (TBW) rating is set to 72TB. The most important factor in this area is however the warranty and Crucial are backing the BX200 with a 3-year warranty. My personal opinion is that this is more than enough as you’re most likely going to upgrade to a newer drive after that time.

The BX200 comes in a default 2.5-inch form factor and with a height of 7mm. It is available in three capacities, 240GB, 480GB, and 960GB and the drives come with a respective MSRP of £66.49 ($84.99), £116.99 ($149.99), and £234.49 ($299.99). The drives all come with a 9.5mm adapter bracket to make it better suited for laptops that require this size and they all come with a copy of Acronis True Image HD included. Acronis True Image is a very useful cloning and backup program to have and it makes the move between your old and new drive a lot easier. A few clicks, a little wait, and you’re ready to rock on with faster speeds.

Crucial also updated the Crucial Storage Executive at the same time as they released the new BX200. The SSD Toolbox helps you to keep the firmware updated and shows you the drive’s status and health. It also enables encryption reset and burst performance with momentum cache mode. New in this version is the user configurable over provisioning for enhanced endurance and performance, something quite a few people will welcome the ability to manage themselves.

Inside the SSD we find a simple PCB that is well utilized with 16 Micron 16nm TLC NAND chips, two Micron Cache chips, and the Silicon Motion SM2256 SSD controller.

The casing is the simple snap-together casing that we’ve seen a lot on SSDs over the past couple of years and it works completely without screws and eliminates another weak point in that direction.

Advanced Features

  • Multistep Data Integrity Algorithm
  • Thermal Monitoring
  • SLC Write Acceleration
  • Active Garbage Collection
  • TRIM Support
  • Self-Monitoring and Reporting Technology (SMART)
  • Error Correction Code (ECC)
  • Device Sleep extreme low power mode (DEVSLP)

Packaging

Crucial’s SSDs always come in a beautiful wrapping and it is no different this time. The front of the box displays the drive itself, the series, and the capacity size that has been packed inside.

The rear of the box contains a little more information such as the drive size and what’s included in the box. It also provides all the different certification logos and a link where to find more resources for the drive.

Inside the box is a 9.5mm drive adapter next to the drive itself as well as a leaflet with your Acronis True Image HD software activation code.