QNAP Launches New Powerful Dual-10Gbps Rack NAS’

When good isn’t good enough, then you’ll want great, and when looking for great, you can’t get past QNAP. They have just launched two new NAS series for the enterprise sector with plenty of storage capacity options, great connectivity, and strong CPUs. Perfect for enterprise users that don’t want to compromise. The two new series are the TVS-ECx80U-SAS R2 and the TS-ECx80U R2.

Both of these new NAS series feature two built-in SFP+ based 10Gbps Ethernet ports without increasing the price over the previous models without the R2 name addendum. Besides the two SFP+ connectors, the system also features four 1Gbps Ethernet ports. Overall, everything you need for an IOPS-demanding application setup such as virtualisation setups and database systems.

The TVS-ECx80U-SAS R2 series comes equipped with a powerful Intel Xeon E3-1246 v3 3.5 GHz processor and 16GB DDR3 non-ECC or 8GB DDR3 ECC RAM. A great hardware base for almost any setup. The TS-ECx80U R2 series provides models powered by an Intel Xeon E3-1246 v3 3.5 GHz processor too and these come with 4GB DDR3 ECC RAM. Further, the series offers options with an Intel Core i3 3.5 GHz processor and 8GB DDR3 non-ECC or 4GB DDR3 ECC RAM too.

There are quite a few models to choose from, in various sizes and with varying drive bays. They all have four DIMM slots, extra internal ports for caching, redundant power supplies, and much more.

Both of these new QNAP series should be available now, so all that’s left to do, is to select which one you want.

Supermicro SoC Motherboard with 17 SATA Ports Spotted

A small new motherboard from Supermicro has been spotted on the shop-shelves, the Supermicro A1SA7-2750F. This tiny board is feature packed with a total of 17 SATA3 6GB/s ports and is a totally passive cooled System on a Chip (SoC) supporting up to 64GB memory. Sparked your interest? Here are the rest of the details.

The A1SA7-2750F has an Intel Atom C2750 at it’s heart with 8 cores/8 threads. It is a compact and fanless motherboard operating at 2.4GHz, or 2.6GHz with Turbo. With 4 RAM slots and support for 16GB modules, this board supports up to 64GB ECC/non-ECC DDR3 with a speed of up to 1600MHz.

The 16 blue SATA ports are powered by a LSI 2116 SW 6Gbps SATA/SAS controller and it has an additional yellow SATA port at the top that is controlled by the SoC itself. That is an amazing amount of on-board SATA ports for such a small form factor. The motherboard also has a direct on-board USB port and a SATA DOM power connector. At the bottom we see the single PCI-Express 2.0 x4 connector (in x8 slot).

The rear IO panel has two USB 2.0 ports and two normal Gigabit Ethernet RJ 45 ports, but it also features a dedicated port for the Intelligent Platform Management Interface (IPMI) and a VGA D-SUB port.

Not only does this Supermicro motherboard have 16 SATA ports, it also comes bundled with cables for them all. That is a big bunch of cables in the box, but other then that and the manual it doesn’t look like many accessors are supplied.

The Supermicro A1SA7-2750F was priced at 66,980 yen including tax, that’s roughly £390. It isn’t the ordinary form factor motherboard (21.08cm x 17.02cm) and won’t fit in cases with ATX mounting. It’s designed for 1U 19″ rack systems, but one could of course just mod the case to fit. The board gets power from a 12V 8-pin and 5V 4-pin connector.

Thank you Akiba PC Watch for providing us with this information.

Image courtesy of Akiba PC Watch.