ASRock E3V5 WS (Intel C232) Super Alloy Motherboard Review

Introduction, Specifications, and Packaging


Today’s motherboard review lands right in the middle of everything. Not because it’s all over the place, but because it has a lot of usage scenarios and support for pretty much any setup. You could use ASRock’s E5V5 WS motherboard in a gaming system as well as in a server setup as both of those setups are fully supported, but its real area of operation is to act as the base for a powerful workstation.

The ASRock E5V5 WS uses an LGA 1151 socket and the board is compatible with both E3-1200 v5 processors such as the one I’ll be using later on in this review, but it also supports normal 6th Generation Intel Core processors – so basically the entire Skylake and Skylake-S line-up. As backbone behind the CPU that you end up using is the Intel C232 chipset that is perfectly tuned for workstation environments and a motherboard like this. Memory wise you can use normal DDR4 DIMMs as well as ECC UDIMM memory modules with a speed of up to 2133 MHz in the four DIMM slots with 15μ gold contacts for a total of up to 64GB RAM.

The gold contacts in the memory slots aren’t the only quality feature in this motherboard. The E3V5 WS motherboard is part of ASRock’s Super Alloy series and comes with premium 50A power chokes and is made of a high-density glass fabric PCB. It also features ASRock’s full spike protection that protects from sudden surges, lightning, and electrostatic discharges (ESD).

The network connection isn’t controlled by the average low-performance controller either and we find an Intel PHY i219LM controller on this motherboard. The Gigabit Ethernet controller supports Wake-On-LAN, supports 802.3az energy efficient ethernet and PXE. The Ethernet controller is one of the parts that is protected by the Full Spike Protection. The second part with protection is the USB. The ASRock E35 WS features two USB 2.0 ports and four USB 3.0 ports on the rear panel and you can connect another four USB 2.0 and two USB 3.0 ports via headers. All of these are protected by the ASRock Full Spike Protection. The audio is also protected by this and we find a 7.1 channel HD Audio controller, the Realtek ALC892. It features Blu-ray audio support and uses ELNA solid audio capacitors. Last but not least, you also find legacy PS2 connectors for both your mouse and keyboard.

 

Internally we find good expansion options too. Since we are dealing with an Intel-based motherboard, we also get IRST for RAID setups across the six SATA3 6 Gb/s connectors. Supported modes include the normal RAID 0, 1, 5, and 10 modes.

There are two PCIe Gen3 x16 slots that support both Nvidia Quadro and AMD FirePro workstation graphics cards as well as consumer graphics cards. There is also full support for the use of AMD’s CrossfireX technology for multiple graphics card usage. As I mentioned earlier, you can make a great workstation with this motherboard. There are three more PCIe Gen3 x1 slots available for further expansion and neither of them will be blocked by the use of two-slot graphics cards. Even with a CrossfireX setup, you’ll still have access to the three x1 slots.

Quality hardware and components are just one side of the story, we also need a good BIOS and proper software to have the best experinece. The E3V5 WS comes with both of those features too. The UEFI BIOS has the easy EZ mode dashboard besides the advanced setup pages, which contains multiple readings of the system’s current status. You can check the most crucial information of your system, such as CPU speed, DRAM frequency, SATA information, fan speed, etc.

Even better, you can reach the tech support purely from the systems BIOS, as long as the system has an internet connection. You can also install LAN drivers onto your windows installation directly from the BIOS.

The ASRock OMG (Online Management Guard) technology allows you to establish an internet curfew or restrict internet access at specified times for your kids. Stay in control of their surfing times without yelling. This probably isn’t the most used function in a workstation system, but it could be used to shut down any connection attempts outside of office hours. Another useful feature is the USB Key function that can replace the password question when you log into windows. Do it by plugging a USB drive in instead.

The well-known ASRock XFast RAM and XFast LAN are also built into this motherboard. The XFast RAM feature allows you to fully utilize the memory space that otherwise can’t be accessed in 32-bit systems, among others. XFast LAN is a quality of service protocol that prioritizes the important traffic so you don’t have to wait for loading times. ASRock Live Update and APP Shop also help to make the maintenance easier.

Specifications

The specifications are taken directly from the manufacturers product page and can as such be subject to changes in future revisions of the product.

Key Features:

  • ASRock Super Alloy
  • Server-Grade LAN chip support
  • Supports the Intel Xeon E3-1200 v5 Processor & 6th Generation Intel Core Processors (Socket 1151)
  • Supports DDR4 2133 & ECC UDIMM memory modules
  • 2 PCIe 3.0 x16 and 3 PCIe 3.0 x1
  • Supports AMD Quad CrossFireX
  • 7.1 CH HD Audio (Realtek ALC892 Audio Codec), ELNA Audio Caps
  • 6 SATA3 and 6 USB 3.0 (2 Front, 4 Rear)
  • Supports Full Spike Protection, ASRock Live Update & APP Shop
  • Microsoft Windows 10 64-bit, 8.1 64-bit, 7 32-bit, 7 64-bit, Server 2012 R2 64-bit, Server 2012 64-bit, and Server 2008 R2 64-bit support

Packaging and Accessories

A quality motherboard also deserves a great look package, and the E3V5 WS got that. The front makes no secret about the boards power.

On the rear of the box, you will find a detailed photo of the motherboard itself as well as feature highlights and specifications.

Inside the box is a user manual, a driver disk, two SATA cables, and an IO shield besides the motherboard itself.

Thecus N2810 2-Bay 4K Capable SMB NAS Review

Introduction


Today’s review is a little bit special as I don’t just get the chance to test one of the newest NAS on the market, but also a new operating system at the same time. Thecus N2810 2-bay SMB multimedia NAS server with 4K playback is in the testing area and it comes with Thecus’ brand new ThecusOS 7.0.

Thecus N2810 NAS is powered by an Intel Celeron N3050 Braswell dual-core processor with 1.6GHz base clock and a 2.16GHz burst speed. This is a great processor for NAS usage as it’s both powerful and energy-efficient. On top of that, the N2810 supports hardware AES 256-bit encryption for that extra layer of security without impacting performance the way a software solution will. This is backed by 2GB DDR3 memory, but you can upgrade the system to a maximum of 8GB DDR3 RAM should you require more. The standard 2GB should still be plenty for normal usage scenarios and seamless 4K media playback.

Thecus opted for a full USB 3.0 setup which is a nice thing to see. Thanks to the USB bus’ compatibility you can easily use legacy devices while having maximum speed on your modern equipment such as high-end flash drives and external SSDs. There are two USB 3.0 ports on the rear and one on the front. The front port also features a convenient one-touch copy button that allows you to copy content to or from a USB drive with a single press of the button.

The two RJ45 Gigabit Ethernet ports on the N2810 support 10/100/1000 BASE-TX Auto MDI/MDI-X and Wake-on-LAN. You can naturally also set them up for link aggregation and Thecus allows you to set all seven modes: Load balance, Failover, 802.3ad, Balance-XOR, Balance-TLB, Balance-ALB, and Broadcast.

There is also the HDMI port for direct playback on your TV or monitor without the need for any other device at all. This is a feature we see more and more on modern NAS devices and it is one that I really love. While streaming is great, a direct connection allows for higher compatibility with formats and there are fewer points of failure or lag on the way. That said, the Thecus N2810 has absolutely no trouble streaming either, but we’ll get to that later.

Keen eyes will already have spotted the serial UART port too and that isn’t something that we usually see on NAS devices, it is however an awesome feature. We sometimes find the port on the PCB, but rarely on the device itself. UART stands for Universal Asynchronous Receiver/Transmitter and is part of the serial communication protocol.

The N2810 is the first Thecus NAS to run the completely new ThecusOS 7.0 operating system and user interface. The refreshed OS offers an easy to use and intuitive user interface and quite a lot of new features over the previous OS including the new Photo Station, Thecus App Center with over 700 apps, and user profiles. Besides the design and feature improvements, it also got a push in regards to the performance where it gets even more out of your hardware.

The N2810 steps up to the challenges that 4K playback creates and provides a robust hardware platform that is able to handle multiple tasks with ease. The built-in HDMI port allows you to transform the NAS into a multimedia hub by connecting it directly to your TV or media center to utilize the power of KODI. There are plenty of streaming options too with basic DLNA as well as Plex Media Server that can stream to your consoles with ease. The server can also automatically assemble iTunes, iPhoto, and Aperture content. Apple TV and Chromecast are both supported too, completing the circle of media abilities.

The N2810 is an SMB NAS and as such comes with a comprehensive list of enterprise-oriented features too, although none of them are limited to firms and enterprises, home users can take equal advantage of them. The Thecus System Failover feature is a fault tolerance process that creates mirrored data volumes. With at least two Thecus NAS available, data is copied by schedule and all changes are mirrored between the two NAS. While the second NAS is not visible, it communicates with the primary NAS. In the event of a power or network failure, a scheduled maintenance, or other unforeseen circumstances, System Failover automatically redirects operations to the secondary Thecus NAS, which then acts as the primary NAS.

Local failover is also achieved easily with a Thecus NAS and Snapshots. With BTRFS support, users can enjoy the simplicity of snapshot backups through BTRFS subvolumes. Snapshots of data at various time points can be manually or automatically made and just as easily later restored to rollback files or folders to previous states.

To complete the backup and failover abilities, the N2810 comes bundled with Acronis Backup Software that can backup all your data to the NAS with a single click as well as local backups and Time Machine support. Real-time remote replication (Rsync) is naturally also supported and it is one of the easiest to use and widest available backup methods.

Security is an important factor on a NAS, after all, it’s the device that holds all your files, memories, and data. Whether you’re an enterprise user or a home user, a virtual private network can come in very handy. The N2810 can operate as a VPN server and allow users to remotely access through a secure network.

Thecus also added Intel Security to the package that gives you an active defense against viruses that might have made it onto your NAS. The software protects you by scanning the files on your NAS and defending it against possible threats. Intel Security is the world’s largest dedicated security technology company and Thecus users will be able to benefit from Intel Security’s powerful software on their NAS entirely for free.

With the Thecus N2810, it is also an easy task to set up your own personal cloud service that will work with mobile iOS and Android devices with the use of Thecus’ T-OnTheGo app and your PCs. The mobile app enables users to access, copy, stream, and edit any data between their NAS and mobile device. Your own personal cloud, available from anywhere with internet access. The access from anywhere is made as easy as it could be thanks to the built-in DDNS feature that will give your NAS a name rather than a difficult to remember and mostly changing IP address.

You can also reverse the whole thing and use the public cloud systems together with the N2810 NAS. The system will work with DropBox, Amazon S3, and ElephantDrive cloud backup functionality. Guard your data with RAID at home and an additional level of protection in the Cloud. Just drag and drop files into the folder on your NAS and access them on any computer or mobile device with DropBox, Amazon S3 or ElephantDrive.

With currently available hard disk drives you get up to 8TB in the consumer sector and 10TB in the enterprise sector. With two drive bays at your disposal, that’s already a lot of storage and you can take maximum advantage of this storage thanks to iSCSI and the efficiency of iSCSI thin provisioning. Connect through iSCSI for the fastest data transfer speeds available and make wasted disk space a thing of the past with thin provisioning’s flexible storage functionality.

Feature Highlights

  • Embedded with Intel Celeron N3050 Dual Core CPU
  • Running on the newly-designed and enhanced ThecusOS 7.0
  • Seamless 4K Multimedia Playback
  • Uninterrupted Accessibility with Thecus System Failover
  • Secure Remote Access with Virtual Private Network (VPN)
  • Faster Transfers: 2 LAN Ports for Link Aggregation
  • 99% Virus Prevention: Bundled with Free Intel Security
  • Complete Client Side Protection: Bundled with Free Acronis Software

Packaging and Accessories

Thecus packed the N2810 in a beautiful box that clearly shows the intended usage, as a 4K capable multimedia center.

The rear of the box continues the beautiful full-colour wrapping with the feature highlights. There’s no doubt that you have a premium device in your hands when you look at the package.

It continues on the sides where the brand new Thecus OS 7 is presented on one side.

The second side reveals the hardware specifications, device size,  and package content.

Inside the product is a quick installation guide and a product disk as well as the warranty card and product notes.

Besides the manuals and the NAS itself, there is also a power adapter with connection cord, two sets of drive tray keys, an RJ45 LAN cable, and a security latch for the power cable that can prevent accidental removal.

SilverStone EP03 USB 3.0 Charging Hub with Display Review

Introduction


USB hubs are nothing new and an essential tool for port multiplying which allows you to connect more devices to your system than you have ports available. This is particularly useful for mobile systems that come with very few ports on their own, but a stationary system can benefit equally from a good USB hub. In today’s review, I am taking a closer look at SilverStone’s EP03 USB 3.0 hub with built-in supercharger function and an integrated display for monitoring voltage and current on all ports.

At heart, SilverStone’s EP03 is a 4-port USB 3.0 hub capable of 5 Gbps transfer speeds. It is naturally also compatible with both USB 2.0 and 1.1 devices on both the host port and the individual connectors. That in itself is nothing new, but everything else is. In fact, this is a pretty smart hub.

When you pick the EP03 hub up and hold it in your hands, you have no doubt that this is a quality built hub. It feels sturdy and it also looks pretty good with its simple plastic case and top plate made of brushed aluminium.

The top is also what instantly reveals one of the features that make this USB hub unique, the built-in display. You can watch the current and voltage in real-time on the display for each of the four ports. Port selection is handled by the small button next to the display which lets you cycle the four ports.

As the display already indicates, this isn’t just a USB hub for peripheral and drive connection, it is also an intelligent charging station that can satisfy users’ increasing demand for fast charging of power-hungry mobile devices. It can deliver 2A to each of the four ports simultaneously and is fully compliant with the USB power delivery specifications 1.2 (BC 1.2).

In addition, the built-in protection mechanism ensures the EP03 can deliver power evenly and safely according to the number or the state of battery charge of connected devices. All these features can also be used to check if a new/replacement charging cable is up to the task and comes with the proper specifications compared to your original cable.

The SilverStone EP03 comes with an AC adapter included which both ensures that you have enough current to all ports, but also allows you to use it as charging station with the use of a host system. It comes with built-in over current and over voltage protections too, so all your connected devices should be safe.

The hub is built around a Genesys Logic GL3522 chipset which actually is a USB 3.1 Gen 1 controller, but that just leaves internal headroom and ensures the best possible connection.

Feature Highlights

  • Integrated display for monitoring voltage and current
  • Supports current up to 2A for each USB port
  • Provides four 5Gbps Super Speed USB 3.0 USB ports
  • High quality brushed aluminum design
  • Supports over voltage and over current protection
  • Includes AC adapter for stable power delivery
  • Compliant with USB power delivery specification 1.2

Package and Accessories

SilverStone always has some great looking packages for their devices and it’s no different for this USB 3.0 hub with fast charging and power meter. It presents itself colourful to the user and begs to be taken home. I know I wouldn’t walk past it.

The rear of the box explains the features in multiple languages.

One of the sides has more details on the product itself in the form of images and text.

And the other side has all the detailed specifications. Overall, a box that tells us everything there is to know about the product inside.

Inside the box, we find a USB 3.0 cable, an AC/DC power adapter, a user guide, and the USB hub itself.

Seagate NAS 8TB (ST8000VN0002) Hard Disk Drive Review

Introduction


Just as you wouldn’t use a low-end graphics card for high-end usage, you shouldn’t use the wrong hard disk drive in your storage system either. There is a reason for every product and you should always pick the one suited for the task at hand, especially when you deal with your storage. Today I’m taking a closer look at Seagate’s impressive 8TB NAS HDD and we will take a look at how well it performs.

As said, when you pick your storage, you need to pick the right one for the task and not just grab anything you can find. This is particularly important when we talk about systems that have to run continuously and in environments with a lot of drives closely packed together. The Seagate NAS HDD goes beyond the standard desktop drives in this regards as it is built exactly for these scenarios.

Vibrations can damage your drives and the can also have a direct impact on your drives speed, and the more drives you install close to each other, the more vibrations you’ll get. The Seagate NAS HDDs are rated for usage in systems with up to 8 bays which gives you an impressive raw capacity of 64TB. The Dual-plane balance system enhances drive performance in aggressive NAS workloads for better vibration tolerance.

The Seagate NAS 8TB drive comes packed with 256MB cache, which is double that of the 6TB model. It uses the default SATA3 6GB/s interface that makes it compatible with pretty much any NAS system. The performance isn’t without either as it comes with a rating of 150 IOPS and above and a sustained sequential read performance up to 230MB/s, an exceptional performance for a mechanical drive. The pure capacity is pretty nice too considering the default 3.5-inch form factor and it has an areal density of 1333Gb per square inch. The average seek read and write latencies are rated to be 8.5ms and 9.5ms, or lower. The whole thing is rounded off with an 180TB per year workload rating, a 1 million hour mean time before failure, and a 3-year warranty.

The great performance comes from Seagate’s years of experience that the put into the hardware and also the firmware that controls the drive. NASWorks is optimized for use as storage drives and it has been tuned to deliver higher performance, a better reliability and interoperability with popular NAS enclosures, and it has the RAID Recovery feature that prevents the NAS from a full RAID rebuild if the RAID degrades. Extended error recovery controls correct data without the need for full drive rebuilds.

Performance isn’t everything, but as we’ve seen above, that part is well covered. There are two further factors that need to be considered before you decide which drives to use: Acoustics and power consumption. A drive that consumes a lot of power can quickly drive up the total cost of ownership and it’s also bad for the environment. The Seagate NAS 8TB drive has an average power consumption of 9W during active operations and an idle power consumption of 7.2W. When in sleep or standby mode, the drives will consume as little as 0.6W. The 8TB NAS HDD doesn’t make much noise either and is rated for just 2.6 bels during operation and 2.5 bels when idle.

Seagate also offers the optional +Rescue Data Recovery Services for extra peace of mind. With this extra service, Seagate has your back and can recover the data from a possible failed drive. Whether the error is due to mechanical failure or accidental damage, most data can be recovered when done right. It is a fast and easy recovery process where your data can be restored in 15 days or less. This is also a field that Seagate is very successful in with an approximately 90% success rate in data recovery.

So if you need drives for backup and disaster recovery, multimedia server and storage, file and print server sharing, archival, remote access, virtualization, or a private cloud storage, then this might be just the right drive for you.

Feature Highlights

  • 8, 6, 5, 4, 3, 2 and 1TB capacity options
  • Seagate NAS HDDs are built and tested to provide industry-leading performance for small NAS systems.
  • NASWorks technology supports customised error recovery controls, power management and vibration tolerance for optimal performance and reliability with workloads up to 180TB/year workload rate limit (WRL).
  • NAS error recovery controls optimise drive health by helping to ensure drives are not dropped from the NAS and sent into a RAID rebuild.
  • Improved vibration tolerance and emission in multi-drive systems with dual plane balance.
  • Advanced power management supports multiple power profiles for lowpower, 24×7 performance.
  • Quiet drive operation enhances the customer experience in living room or office environments.
  • Optional 3-year Rescue recovery service plan protects against data loss from viruses, software issues, or mechanical and electrical breakdowns in a NAS or RAID environment.

Specifications

Package and Accessories

PNY CS2211 XLR8 240GB Solid State Drive Review

Introduction


Today’s review is a special one for me as it is the first time I get to review a PNY SSD. I got the XLR8 CS2211 2.5-inch gaming branded SSD on the test bench today and it will be interesting to see how well it does. The PNY CS2211 SSD is available in three capacities from 240GB over 480GB to 960GB from which I’ll be testing the 240GB model today.

PNY is no stranger in the SSD market and they created some great drives in the past for all sectors of the market, but they’re probably most known for their graphics cards. But we aren’t here to talk about graphics cards, it is about storage today. PNY has taken what they have learned from their previous drives and created the XLR8 branded CS2211 drive, and it shows in the performance ratings.

The drive is rated for a sequential performance of up to 565 MB/s reading and 540MB/s writing, which is about as good as it gets on the SATA3 interface. The random input-output performance is equally impressive with 95K IOPS ratings for both reading and writing. Those are at least the ratings for the larger models and the small 240GB version can’t keep fully up with that. It still comes with impressive ratings despite being a little slower ,with an 87K IOPS rating and a drop in sequential writes to 470MB/s.

It is no surprise that the drive has such good ratings as it is built with only the best components. It utilizes 15nm Toshiba MLC NAND and a Phison PS3110-S10 controller aided by 256MB DDR3 cache package

PNY gave the CS2211 the XLR8 styling as a gaming product, but the design has been toned down a bit in comparison to the previous XLR8 drive design. It is a beautiful design that makes the drive stand out and also makes in an optimal candidate for systems that proudly shows what components they are made off.

There are a lot of products that get a ‘gaming’ label in order to appeal to that market segment, but the CS2211 does deserve this label. It is a perfect gaming drive thanks to its high IOPS performance on top of the high sequential performance. You’ll copy fast, load fast, and should experience even less loading times in-game.

Feature wise we find the basic Trim and SMART capabilities, but the CS2211 also comes with background garbage collection, end-to-end data protection, and error correction code for up to 120 bits per 2K sector. Overall, we see a drive that presents itself very well and PNY agrees with a 2 million hours mean time before failure rating and a full 4-year warranty.

The 7mm slim drive is perfect for usage in both desktop and notebook systems where it also will fit well in 9.5mm drive bays thanks to the included adapter bracket. The SSD doesn’t feature the DevSleep function that I really like to see in drives, but that isn’t a deal breaker and most gamers don’t want power saving features, they want pure and raw performance which the CS2211 delivers.

Aside from the beautiful brand sticker on the top, the drive is built with a standard 2-piece snap-together enclosure that holds the PCB and doesn’t require any screws that could loosen themselves over time in high-vibration environments.

The PCB itself is a two-thirds length one with a total of eight NAND chips distributed over the front and back. The Phison PS3110 S10C controller sits firmly in the middle of the PCB. Next to it we also see the Nanya DDR3 cache chip that helps the drive to achieve the great speeds that it can.

Specifications

  • Capacity: 240GB
  • Part Number: SSD7CS2211-240-RB
  • Form Factor: 2.5 inch
  • Height: 7mm
  • Interface: SATA-III 6Gb/s; backward compatible with SATA-II 3Gb/s
  • Max Sequential Read Speed: 560 MB/s
  • Max Sequential Write Speed: 470 MB/s
  • Max Random Read Speed: 87,000 IOPS
  • Max Random Write Speed: 95,000 IOPS
  • NAND Type: MLC
  • Ideal For: Gaming, Hard disk drive replacement, photo and video storage, and boot drives

Packaging and Accessories

The PNY XLR8 CS2211 solid state drive came packed in a simple black box with the PNY logo on the side.

Inside the box is the SSD itself as well as a 9.5mm adapter for usage in notebooks and laptops designed for the 9.5mm thick drives. By adding the adapter to the drive, you make sure that it’s firmly seated in the system and doesn’t rattle around.

Normally you’d get the drive in a more colourful wrapping and with an included registration key for the Acronis True Image cloning software. Review samples like this one sometimes come with a few things missing because the company is in a hurry to get the drives to us so we can test them for you – and they know that we don’t need the extras.

Kingston Releases Micro-SD Card Designed for Action Cameras

There are plenty of memory cards on the market, but it aren’t all of them that are equally suited for all tasks – much in the same way as it is with any other kind of storage product. Kingston just released a new micro SD Card specifically designed for use with action cameras and that comes with UHS-I U3 Speed Class 3 ratings. The new Kingston SDCAC microSD Action Camera UHS-I U3 memory card comes in various sizes from 16GB and up to 64GB.

The new Kingston SDCAC microSD Action Camera UHS-I U3 memory card comes in various sizes from 16GB and up to 64GB. Its rugged performance and form factor make this micro SD card ideal for most action cameras including GoPro and drones.

The cards feature speeds of up to 90MB/s when reading and up to 45MB/s when writing. While that doesn’t sound like much when we compare it to SSD performance, it is quite nice for a card of this size. And we also have to keep in mind that these are minimum speed ratings and not possible maximum speeds.

The sustained performance allows outdoor enthusiasts to shoot in 4K resolutions without missing a single frame and even shoot up to 240 frames per second on normal Full-HD recordings. With a capacity availability from 16GB to 64GB, there should be a right card for everyone. The 16GB and 32GB capacities are shipping this month while the larger 64GB ships next month.

The cards can perform in any environment as they are waterproof, shockproof, X-ray proof, and temperature proof. Pretty much just proofed. The card is available in two version, with and without an SD card adapter that lets users quickly and easily view footage on a PC, notebook, or media reader.

Kingston’s microSD Action Camera UHS-I U3 is backed by a lifetime warranty, free technical support, and legendary Kingston reliability. No word on pricing yet.

Features and Specifications:

  • Designed for action cameras and drones: shoot video at up to 30 frames per second in 4K or capture HD footage at 240 frames per second on your GoPro, action camera or drone to preserve every second of your latest adventure.
  • Rugged for every adventure: waterproof, shockproof, X-ray proof, and temperature proof to perform even in harsh environments.
  • Enough space for your trip: whether shooting in 4K or at 240 frames per second, the card has room to keep you going.
  • Guaranteed: Lifetime warranty, legendary reliability, free technical support.
  • Capacities1: 16GB, 32GB, 64GB (shipping later)
  • Performance7: 90MB/s read and 45MB/s write, UHS-I Speed Class 3 (U3)
  • microSD Dimensions: 11mm x 15mm x 1mm
  • SD Adapter Dimensions: 24mm x 32mm x 2.1mm
  • Format: FAT32 (microSDHC 16GB-32GB); exFAT (microSDXC 64GB)
  • Operating Temperature: -25°C to 85°C
  • Storage Temperature: -40°C to 85°C
  • Voltage: 3.3V
  • Warranty: Lifetime

Lexar 512GB Portable SSD D512 USB 3.0 Solid State Drive Review

Introduction


Today we are taking a closer look at fast external storage, more specifically Lexar’s newest portable SSD called the D512. Lexar also offers the drive in a smaller D256 version with 256GB capacity, but I have the pleasure to have to big 512GB model on the test bench today.

Right away we see that we have a small and compact drive which is perfect for a portable unit. On top of that, it is also a very light drive that you barely will notice when you have it packed next to the rest of your items. So we have a strong portable drive right of the start, but what about the performance. Performance has to match and that’s where a portable SSD shines over a flash drive. Both types of drives use NAND technology, but other than that there are big differences.

Lexar’s portable SSD is capable of sequential transfer speeds up to 450MB/s when reading and 245MB/s writing which is pretty nice for a portable storage solution that is as small and light as the D512. The is no official rating for random performance, but we’ll naturally have a look at that once we get the benchmarks rolling.

The tiny D512 provides plenty of space for you while you are on the go and travel about. Whether you want to take along you movie collect, music library, and photos, you’re covered with plenty of storage. It is also an optimal drive to unload all your vacation photos onto from memory cards and portable capture devices.

One of the unique things that come with the D512 is the capacity meter on the front. The first five LEDs act as such and will light up as the drive gets filled with data. This allows you an instant view on the drive fillage as soon as you plug it into your system. The second unique feature works in conjunction with Lexar’s other Workflow products. The new portable SSD uses the same form factor and connector which makes it compatible with the Workflow drive hubs. Just plug the drive in and you are good to go. I love the Workflow system so much and use it almost every day for my work here at eTeknix.

The drive is also highly compatible when it comes to volume setup as it supports both NTFS, FAT32, and exFAT. On its own, the drive is fully plug-and-play and doesn’t require any drivers or tools of any sort. This naturally originates from USB standard that is plug-and-play by definition.

Lexar is part of the Micron Group which also means that the drive is equipped with some of the best NAND flash on the market and that has undergone high-grade quality checks before assembly.

Feature Highlights

  • SSD-level performance — up to 450MB/s read and 245MB/s write speeds
  • Sleek and compact design
  • Available in 256GB and 512GB capacity options
  • LED capacity meter displays available storage space
  • Great for use with Lexar Professional Workflow line products
  • Two-year limited warranty

Package and Accessories

Lexar packed the 512GB Portable SSD in a neat white box that shows the drive’s look and basic specifications on the top.

The bottom of the box also has the system requirements, which is a USB port, as well as the basic specification again, but in several languages.

Inside the box, you will find the portable SSD itself as well as a USB 3.0 cable.

Both sides of the drive are covered with a protective plastic film to make sure it arrives scratch-free in your hands. It also gives you that little bit of joy it is to remove the film from your brand new device.

OCUK Offers Free SSD with ASUS GTX 970 Graphics Cards

Who doesn’t like to get free stuff? And especially when it is something as sweet as a solid state drive. That is what you currently can get, at least if you purchase one of the participating ASUS GTX 970 graphics cards at Overclockers UK.

For a limited time, and as long as stock lasts – as always – you can get a Kingston HyperX Fury 240GB solid state drive for free on top of the Nvidia based GTX 970 graphics card that your purchasing. It isn’t just some cheap SSD either as it comes from Kingston’s HyperX division. The 7mm slim 2.5-inch SSD delivers a solid performance, and for free, who can complain. You still get the bundled game Tom Clancy’s The Division on top too, making this a very good deal for a well-performing graphics card.

Speaking of the graphics card, the first of the two participating ASUS graphics cards are the GTX 970 DirectCU II OC Strix with 4GB GDDR5 memory, a core clock of 1141MHz, and a boost clock up to 1253MHz. The second card is the GeForce GTX 970 Turbo OC which also comes with 4GB GDDR5 memory, but a slower clock speed. The Turbo OC has a core clock of 1088MHz and a boost clock of 1228MHz.

Which of the two cards you pick for your setup is based on optical preference, amount you want to spend, and probably more things too – but it is safe to say that both are great graphics cards where you get a lot of bang for the buck, especially considering the extras you get in this deal. The DirectCU II OC Strix will set you back £299.99 while the Turbo OC will cost a little less and set you back £275.99.

Will you be picking up one of these deals? And if, which of the two cards will you go for. Let us know in the comments.

SilverStone TS11-C USB 3.1 Docking Station Review

Introduction


We have tested quite a few of SilverStone’s storage solutions in the past and while the new TS11-C external hard drive docking station might look like previous models, it is special as it comes with the newest technologies. In the past, we have been limited by the USB 3.0 protocol and its maximum 5Gbps transfer speeds even though we connect a 6Gbps capable drive to the docking station. SilverStone’s new TS11-C should make up for this as it uses the USB 3.1 connector for a transfer speed of up to 10Gbps.

SilverStone’s TS11-C is an external hard drive docking station that is made to accommodate either a 2.5-inch or a 3.5-inch drive at speeds up to 10Gb/s with its USB 3.1 Gen2 capability and it also features the new Type-C connector. Since USB is plug and play, as long as you have your USB drivers installed, which also means that this docking station is plug and play. You don’t need any additional drivers to get going, just plug it in, add a drive and turn it on. It is almost a given with a docking station like this, but it’s still worth highlighting that the TS11-C supports USB Attached SCSI protocol (UASP) which allows much better transfer rates in systems that support this compared to those who don’t.

The body itself is gold coloured and made of aluminium. This aids the passive unit itself to stay cool, but it also helps the inserted drive to dispose of its heat. This isn’t as much an issue when used with solid state drives, but mechanical drives need quite a bit of cooling. The cover itself is made of plastic to prevent your drives from being scratched. The top slot cover is a two-piece item that automatically folds back as you insert a drive. The small gap for 2.5-inch drives also helps with the positioning on top of the connector.

The docking station is built around an ASMedia ASM1351 chipset that provides this unit with its USB 3.1 Gen2 capability with speeds up to 10Gbps through the Type-C connector. The included USB cable uses a normal type USB connector which also makes it easy backward compatible with USB 3.0, 2.0 and 1.1. The internal SATA3 interface is also backward compatible with SATA2 and SATA1 drives, as it should be.

With an external device like this that is highly portable, you might want to take it on the road with you too in order to connect extra storage to your mobile devices such as laptops and modern smartphones. SilverStone thought of this too and added a power adapter with exchangeable plugs to be used in pretty much every place on earth no matter what plug type or voltage available.

Feature Highlights

  • USB 3.1 type-C connector with Gen2 up to 10Gb/s super speed transfer rate
  • Supports UASP (USB Attached SCSI Protocol) function for even faster performance
  • Aluminum body with tool-free and tray-less design
  • Supports all 2.5 and 3.5-inch SATA drives up to any capacity
  • Plug & play with support for hot-swapping
  • Multinational adapter socket included

Specifications

The specifications are taken directly from the manufacturers information and might as such be subject to changes in possible future revisions of the product.

Package and Accessories

The box uses the same gold colour as the device and is overall a great looking product packaging. The front shows how the docking station looks and tells you what it is.

The rear of the box contains the specifications and a few more details about the docking station and what drives it can take.

Inside the box, we find a USB 3.1 Type-C to Type-A connector, a user manual, and the multi-regional power adapter next to the docking station itself.

SilverStone MMS01 Military-Grade USB 3.0 Enclosure Review

Introduction


If you are living an active lifestyle and still want to carry around your storage while keeping it protected the best way possible, then you need something other than a normal portable storage device. There are many rugged portable drives on the market by now and we’ve had a look at several of them already. But what if you already have a drive and want to turn that into a safe portable storage drive? Then you need something like SilverStone’s MMS01 military-grade USB 3.0 portable enclosure. Today I’m taking a closer look at how this works and how well it works.

SilverStone’s MMS01 is a thick protective enclosure that has been IP65 certified which makes it dust proof and water-resistant. The enclosure doesn’t stop there, it has been tested and proven to be immune or resistant to rapid temperature change, vibration, 1.2-meter drop, salt spray, sand, and fungal growth. You shouldn’t fully submerge a setup like this, but other than that your data’s drive is well secured.

Durability doesn’t mean that we need to sacrifice performance and the MMS01 is bound to show us some great numbers. Powered by the USB 3.0 bus and with UASP support, the only limitation is the 5 Gbps of the USB bus. The enclosure is equipped with a USB 3.0 type B port and the drive is backward compatible with USB 2.0 and 1.1. Thanks to the USB interface, we don’t require any extra drivers or anything and it will work as plug-and-play with both Windows and Mac OS systems.

Inside the enclosure there is room for a drive with a height of up to 9.5mm, allowing you to mount most 2.5-inch hard disk drives. Solid state drives with the thinner 7mm height aren’t a problem either and that is what I’ll be using in my tests today.

With a weight of just 280 gram, the MMS01 is a lightweight unit despite its great protection. This is an important factor when we deal with mobile drives as no one wants to carry unnecessary weight with them. If you are looking for an enclosure that can protect your drive in the harshest environment possible, the MMS01 might be the one to get.

Feature Highlights

  • Super speed USB 3.0 and SATA 6G interface
  • Supports 7mm or 9.5mm thick 2.5” SATA hard drives or SSD
  • Supports UASP (USB Attached SCSI Protocol) for additional performance
  • Unique anti-vibration silicone sleeve over ABS shell for complete protection
  • Adheres to US military standard (MIL-STD-810G) for thermal, drop, shock, humidity, sand, dust, and fungus resistance
  • Certified IP65 for dustproof and water resistance

Specifications

The specifications are taken directly from the manufacturers information and might as such be subject to changes in possible future revisions of the product.

Package and Accessories

The colour scheme on the package fits the military theme originating from the certifications and presents the enclosure well. The front has all the vital features presented for a quick and easy view.

The rear of the package contains more details information about the specifications and a multilanguage description.

Next to the enclosure itself, we find a USB cable, an Allen key to take the enclosure apart and mount the drive as well as a manual inside the package.

Tenda AC15 Dual-Band AC1900 Gigabit WiFi Router Review

Introduction


Tenda might be a company that is mostly known for the entry-level products at lower speeds, but they also got some top of the line devices that easily can compete with anything else on the market. Today I’m taking a look at the new Tenda AC15 which is an AC1900 Smart Dual-Band Gigabit WiFi router.

Tenda designed the AC15 with the smart home in mind and as such the router brings a lot of features that can make your everyday digital life a lot easier. Starting with the dual-band AC1900 technology we know that we have a strong router in our hands that will deliver some of the best possible wireless network speeds. The AC15 also features beamforming technology that helps to boost the range of the high-powered amplifiers and external antennas.

The AC1900 standard defines a total speed capability of the router up to 1900Mbps where it is capable of delivering both 1300Mbps 802.11ac at 5GHz and 600Mbps 802.11n at 2.4 GHz concurrently. The Beamforming+ technology helps to achieve the best connection with each device as it locks onto a device’s location and strengthens the signal in that direction rather than blasting it equally in every direction.

The router is equipped with 3 external dual band antennas with a 3dBi strength. Sadly the antennas aren’t replaceable, at least not without taking the unit apart, but they should offer plenty of performance for small to mid-sized homes.

Tenda built the AC15 router around a Broadcom dual-core processor and equipped it with DDR3 memory, but the specifications page does not reveal which exact processor nor how much memory it has. That might, however, be something we can find out through the user interface or by opening it up.

Next to the obligatory WAN port, Tenda equipped the AC15 router with three more Gigabit Ethernet ports for your wired network devices. It also features a USB 3.0 port for easy storage and printer connections which then can be shared to any device that you want via your network. This also allows you to create a personal cloud system and that’s even an easy task to do thanks to Tenda’s personal cloud system. We’ll have a close look at that when we got to the user interface.

There is an ever-increasing concern what effect WiFi signals can have on us humans and it’s better to be on the safe side than sorry. Whether this is a concern to you or not, the Healthy e-life functions in the router allow you to dim the LEDs as well as turn the WiFi signal on and off by a user defined schedule. Why should you be bothered by blinking lights and wireless signals when you aren’t home or asleep. Might as well turn it off, which also saves on the electricity bill.

The initial setup and further configuration of Tenda’s AC15 is a breeze as you can do it from any device, whether it’s wired or wireless. You can either use the easy web setup wizard or use the available Tenda apps. Once setup, you have a powerful wireless router that supports IPTV, VPN, FTP, DDNS and DLNA among others.

Feature Highlights

  • Ultimate 11ac speed of up to 1900Mbps, delivering both 1300Mbps 802.11ac at 5GHz and 600Mbps 802.11n at 2.4 GHz concurrently.
  • Broadcom dual-core processor with DDR3 memory for multi-client with responsive performance and fast speed.
  • Beamforming+ technology boosts range for the 802.11ac WiFi devices.
  • High powered amplifiers and three external antennas for whole-home coverage.
  • USB3.0 for personal secure cloud and printer sharing.
  • Smart managements of WiFi schedule, LED indicator and power saving all are for your healthy E-life.

Package and Accessories

The retail package for the Tenda AC15 router is a beautiful full-coloured one. The front teases the features and the units design with its eye-catching and bright design.

The rear of the box has some more information on the routers usage scenarios as well as more information about the features.

The full network specifications can be found on the side of the box, so you know what you get before you make the purchase.

The router itself is wrapped with a plastic cover to protect it from scratches. There’s also an extra SSID and password sticker on the plastic which you can remove and place somewhere else for safe keeping.

There’s an install guide, GNU license notice, and a wireless standard certification included, but the last two are more for legal reasons.

Besides the router and the manuals, we also find a power adapter, an RJ45 LAN cable and the foot for the router inside the box.

 

ASUS RP-AC56 Dual-Band Wireless AC1200 Range Extender Review

Introduction


When you invest in a wireless network repeater in order to increase your range and cover dead spots in your home, you can either go for a run-of-the-mill unit that provides you with the basic functionality or you can go all out and get a device like ASUS’ RP-AC56 wireless dual-band AC1200 range extender and access point. The ASUS RP-AC56 is anything but ordinary and today I’ll take a closer look at everything this little device has to offer.

The ASUS RP-AC56 can extend your existing 802.11ac dual-band Wi-Fi network with speeds up to 1167 Mbps and thanks to its two external antennas it will have a great ability to enhance Wi-Fi signal coverage and boost your Wi-Fi everywhere. But it does a lot more than that, it also comes with a Gigabit Ethernet LAN port for even more connectivity as well as a 3.5mm audio jack for music streaming.

The dual-band repeater supports both the legacy 2.4GHz band and the newer 5GHz band for AC1200 speeds. The two external antennas support MIMO for the best connection even when multiple devices use it at the same time. With speeds up to 867 Mbps on the 5GHz band you can get close to what a wire connection has to offer, at least with the proper signal strength and isn’t that just the reason that we want a device such as the RP-AC56.

ASUS made sure that the setup is as easy as it can be, all it takes is a push of a button thanks the easy WPS setup. Hit the button on your router and then on the repeater, wait for a little bit, and the connection will be established. And that really is all you need to do, but you can do more. The LEDs on the front don’t just show which network band is being used, they also show the signal strength in three steps (Red, Yellow, Green) which in return allows you to find the perfect position for maximum coverage.

https://www.youtube.com/watch?v=uf-0m-BMyo0

As previously mentioned, the RP-AS56 comes with a convenient Gigabit Ethernet LAN port built-in and the function of it depends on the usage of the RP-AC56. The flexibly designed device can work as a normal repeater, but it can also work as a wireless access point or as a media bridge. In access point mode it can be connected to any wired network and create a personal Wi-Fi hotspot. In media bridge mode it can be connected to any Ethernet-compatible device to give it Wi-Fi capability where it didn’t before.

The LAN port can also be used for easy access to the web-based configuration menu without the need for any driver disc or application, but it isn’t something that is needed. You can naturally also set it up wirelessly from devices such as your tablet or smartphone.

You can also connect speakers directly to the RP-AC56 wireless repeater and stream your favorite music direct from any mobile device that has the ASUS AiPlayer app installed. It is compatible with a wide range of multimedia formats and delivers a smooth and effortless streaming experience. The AiPlayer app is available from the App Store and Google Play and it also works for streaming without extra software when used from a Mac and iOS device.

Additionally, the RP-AC56 also supports ASUS’ ExpressWay feature that uses the dual-band capabilities to create an efficient connection with improved reliability. In normal mode, the repeater uses the two bands simultaneously for connecting to devices for the widest compatibility. ExpressWay can dedicate one band for connecting to the router and the other band for connecting to the device as long as one of them supports the 5GHz band. It also features the hassle-free Roaming Assist technology. With this enabled, you never have to switch connections manually between RP-AC56 and your ASUS router as you move around the home. Your device will connect automatically to the strongest Wi-Fi signal whether it’s from the router or the repeater.

Features

  • Extend your existing 802.11ac dual-band Wi-Fi network with speeds up to 1167 Mbps.
  • Two external antennas enhance Wi-Fi signal coverage and boost your Wi-Fi everywhere.
  • Quick and secure setup with just a press of the WPS button.
  • Smart LED signal indicator helps you find the best location for optimum Wi-Fi performance.
  • Rotating mains plug for flexible positioning in any power socket. (Not in all regions)
  • ASUS AiPlayer app for streaming music, with multi-protocol support.
  • ASUS ExpressWay uses full-speed device connections to boost performance.
  • Roaming Assist helps you to get a stable connection everywhere in the home or office.

Packaging and Accessories

The ASUS RP-AC56 comes in a great looking retail box that shows how the device looks on the front where it also shows the main features and highlights the Android and iOS support.

The rear of the box explains what the device does and how you can utilize it. It also showcases the AiPlayer for wireless streaming and more details on the features. Overall it’s a great box where you shouldn’t be left with any questions as to what the device you’re holding in your hands can do.

Inside the box, we find a quick start guide and ASUS VIP Member Warranty Notice in multiple languages as well as a 3.5mm audio cable to connect the repeater to an amplifier or speaker set.

QNAP TAS-268 QTS and Android Combo NAS Review

Introduction


In today’s review, I am taking a look at a NAS that comes with a twist that we previously haven’t seen out-of-the-box. I’m talking about QNAP’s TAS-268 NAS which is a 2-bay hybrid NAS that runs both QNAP’s QTS and Android at the same time. The TAS-268 doesn’t just have a twist in the operating system, the physical form also takes a different approach than most NAS on the market.

At the core, the QNAP TAS-268 is a normal NAS with the function that you would expect from such a unit. It doesn’t come with the most power processor, but in return, it also comes with a low price tag despite all the functionality. It is built around an ARM 1.1 GHz dual-core processor and comes with 2GB DDR3 memory. It also features an onboard 4GB flash memory to be used by the Android system. While this doesn’t sound like much, it should be plenty for this device’s functions.

Besides this 2-bay unit, QNAP also released a 1-bay unit with the only difference being the number of drives you can install. But it is the 2-bay unit that we’re looking at today and it supports RAID 0, RAID 1, JBOD, and single disk setup with two 3.5-inch hard disk drives. There are plenty of external connection options on the TAS-268 with one Gigabit Ethernet RJ45 port, four USB 2.0 ports on the rear and one USB 3.0 port on the front.

The front also features an SD card slot for easy and portable storage connection just as you’re used to from your Android phone or tablet – just much easier. You don’t need to remove any covers and battery as it is the case with many phones, instead, you have the SD slot right at the front of the device where you need it.

To complete the convenience experience, QNAP also added the one-touch copy button which allows just what the name promised, copy the content from the front USB port with a single press of the button. How the button shall react can be changed in the QTS system and it is capable of copy operations in both directions, both to and from the USB drives.

With a NAS like this that supports Android, we also need an HDMI port in order to connect it to our monitor or TV and the TAS-2688 also features this on the rear. It is accompanied by four USB 2.0 ports that come in handy for keyboard, mouse, and game controller connection in order to take even better advantage of the Android platform and all the available apps. You can also control the system through the use of the included IR remote control. The TS-268 supports HD and 4K H.265 / H.264 file formats, 4K H.264 with up to 15 frames per second and 4K H.265 with up to 30 frames per second.

Shouldn’t you want to connect the device via HDMI or maybe you just want to get your stored and linked media files onto more devices then you can take advantage of the common DLNA streaming that QNAP also supports. Consoles, Smart TVs, Mini-PCs and much more support this and it is probably the easiest method of streaming content.

Google Play also provides various media apps including YouTube, TED, Twitch and other video apps to be used directly on the NAS. You can install and stream movies, cartoons, TV series, news, and sports at any time in order to enrich your entertainment level.

QNAP introduced their myQNAPcloud system quite a while ago by now and naturally the TAS-268 also supports this. It isn’t just a simple and effective way to set up your new NAS, it also allows you to connect to the finished setup much quicker and easier. By acting as a simplified and locked-in dynamic DNS system it will allow you to easily connect to your NAS, securely, from anywhere in the world and any device as long as you and the NAS both have internet connectivity.

With that in mind, it is incredibly easy to create you own personal cloud system where you don’t have to rely on commercial or free options that thousands of other people use. Keep your files at home where you know who has access and who doesn’t. It is a breeze to sync files to the NAS via QNAP’s own Qsync as well as the Cloud Drive Sync app from the QTS app center that can sync files with Google Drive and Dropbox.

Both real-time and scheduled backups on Windows systems as well as with Time Machine on Mac OS systems is easily taken care of with QNAP’s NetBak replicator and it also features disaster recovery solutions including RTRR, rsync, and cloud storage backup (Dropbox and Google Drive) are also included. So all the bases are covered.

As previously mentioned, you naturally also get the ordinary NAS cross-platform file sharing capabilities from a centralized data storage. Whether you use Linux, Unix, Windows, or Mac OS, your connection is covered. And with the use of apps you get the same connectivity on your Windows Mobile, Android, or iOS system.

So far I have mostly been talking about the software functionality, but that’s just one of the great aspects on this NAS. The design is quite a bit different than we are used with a vertical unit rather than a horizontal oriented. This saves space on the desk with a smaller footprint which can be a vital factor near your entertainment system and similar likely placement scenarios.

The TAS-28 is also a very light unit due to a simple and clever design. Even better, the entire NAS can be set up completely tool-less for your convenience. There is a single thumbscrew at the bottom with which you can open up the chassis and the drive are mounted tool-less too with the included adapters.

Despite having a unique outer design, a lot of the internal design is something that reminds us of previous 2-bay NAS units – just improved with the tool-less drive mounting options and vertical instead of horizontal.

With all this talk about Android, we shouldn’t forget about the base QTS operating system. It provides a web-based user interface to help you easily manage files on the TAS-268. You can install various apps based on your needs to fulfill tasks like storage, backup, management and multimedia applications. File Station allows you to upload, download and manage files anywhere with a web browser. All of your photos, music and videos can be indexed by the built-in Media Library, and easily managed and shared with the Photo Station, Music Station and Video Station. The energy-saving Download Station is your 24/7 download center, allowing you to quickly download files to enrich your collection.

Feature Highlights

  • Dual-core CPU
  • Android and QTS operating system
  • Organize & manage files and backup tasks in one centralized location
  • Synchronize files between computers, laptops, and mobile devices
  • Remotely access your files securely from your personal cloud
  • Stream your multimedia library via DLNA to other devices and your TV
  • Enjoy direct media playback via HDMI with HD videos and photos
  • Compact and streamlined chassis ideal for a desktop or living room environment

Packaging and Accessories

The TAS-268 comes in a simple white box with a representation of the NAS unit as well as the feature highlights.

The rear of the box contains some more information as to what’s so special about this NAS, but it’s kept short.

Opening up the box and we find a brand new NAS that is well protected with self-adhesive plastic film – you know the kind we all love to peel off once we get a new gadget.

Besides the NAS itself, there is a quick installation guide to help you get started quickly, a power supply brick and power cord fitting the region you bought it in as well as an RJ45 LAN cable.

There’s also a small remote control included that is about 3 inches long. Shown below are also the four HDD mounting brackets that simply snap into the drive and hold it in place.

Supermicro X11SAE Workstation (Intel C236) Motherboard Review

Introduction, Specifications, and Packaging


Intel recently released their Greenlow based Skylake series Xeon CPUs and it’s a pleasure to take a look at the first enterprise-grade motherboard built for these processors today. I have Supermicro’s X11SAE motherboard on the test bench which is a standard ATX-sized single CPU board, but one with all the trimmings.

“Supermicro’s new X11 UP workstations, long-life embedded systems and motherboards integrate the latest technologies such as USB 3.1 and M.2 as well as step up performance, density and efficiency to provide a new generation of Green Computing solutions,” said Charles Liang, President and CEO of Supermicro. “Indeed, with Supermicro’s first-to-market integration, advanced engineering and architecture expertise, we deliver the widest range of Skylake-S platforms available to the industry, enabling our customers with exactly the best competitive advantage on the market.”

Supermicro’s X11SAE doesn’t just support the new Greenlow Intel Xeon E3-1200 v5 family CPUs, you can also use 6th Gen Core i7, i5, i3, Pentium, and Celeron series processors. The brain behind the motherboard is the new C236 chipset which comes with a lot of enhancements over the predecessors and Supermicro generally added the newest technologies to this motherboard. Additionally, the motherboard supports up to 64GB DDR4 2133MHz ECC UDIMMs in its 4 sockets. While this motherboard does support ECC and non-ECC modules, it doesn’t support RDIMMS, so make sure you get the right ones.

There are plenty of storage features on this motherboard with the eight native SATA3 6 Gbps ports provided directly by the chipset. The ports support RAID 0, 1, 5, and 10 for that extra spice in your storage setup and the motherboard also has two SuperDOM ports with built-in power. You’ll also find a next-gen PCIe M.2 slot beside the default SATA3 ports, allowing you to get that extra speed. The M.2 slot doesn’t support AHCI modules, but 2242, 2260, and 2280 PCIe modules will run at a great speed thanks to the x4 slot.

Further expansion can be added through the two PCI-E 3.0 x16 and three PCI-E 3.0 x1 slots. The Supermicro X11SAE also features two legacy 5V PCI 32-bit slots for use with older hardware despite the upgrade to the newest platform.

Externally the X11SAE has two Gigabit Ethernet RJ45 LAN ports where one is powered by an Intel i210-AT and the other is powered by an Intel i219LM chip. There’s also a DVI, a DisplayPort, and an HDMI out for use when processors with iGPU are inserted into the motherboard. Further, you’ll find two USB 3.0 ports, two USB 2.0 and two USB 3.1 ports on the rear IO area. The USB 3.1 ports sport the increased bandwidth and power which allows it to run with up to 10Gbps.

Internally you can connect an additionally four USB 3.0 and size USB 2.0 ports. The motherboard also features two COM port headers, an ALC 888S 7.1 HD Audio chip, a TPM 1.2 header, and much more.

A workstation motherboard also needs a good set of monitoring abilities. You can connect up to five PWM fans with status monitor for speed control, on/off settings, and tachometer. The temperature monitoring includes the CPU and chassis environment as well as CPU thermal trip support and I2C temperature sensing logic and Thermal Monitor 2 (TM2) support.

As a Supermicro motherboard, we also have the benefits of their SuperDoctor 5 software that monitors system health of hardware and operating system services from the target nodes in real-time and provides alerts to administrators on the availability of systems in data centers.

Specifications

The specifications are taken directly from the manufacturers product page and can as such be subject to changes in future revisions of the product.

Key Features:

  • Single socket H4 (LGA 1151) supports: Intel Xeon processor E3-1200 v5, Intel 6th Gen. Core i7/i5/i3 series, Intel Celeron and Intel Pentium
  • Intel C236 chipset
  • Up to 64GB Unbuffered ECC/non-ECC, UDIMM DDR4 2133MHz; 4x DIMM slots
  • 2 PCI-E 3.0 x16 (run at 16/NA or 8/8), 3 PCI-E 3.0 x1 (in x4), and 2 5V PCI 32-bit slots
  • Single GbE LAN with Intel i210-AT, Single GbE LAN with Intel i219LM
  • 8x SATA3 (6Gbps) via C236; RAID 0, 1, 5, 10 + 1 PCIe M.2 (support PCIe x4 only, 2242/2260/2280)
  • I/O: 2x COM, TPM 1.2 header
  • 2x SuperDOM with built-in power
  • 6x USB 3.0 (2 rear + 4 via header), 8x USB 2.0 (2 rear + 6 via headers), 2x USB 3.1 (10Gbps, rear)

Packaging and Accessories

The Supermicro X11SAE comes in a neutral package and that’s all that’s needed for a board like this. It isn’t one you’ll find on a shelve in the local store while browsing around, it’s one your order because you know it’s the one you want. There’s still a sticker on the side that will tell you what’s inside and what the base specifications are.

The rear of the box explains a little bit about the series of motherboards which this one is part off. You get basic information about the series as well as a quick view of optimized chassis and systems.

Inside the box we find four SATA3 cables and the IO shield next to the motherboard itself.

OCZ Trion150 240GB and 480GB Solid State Drive Review

Introduction



OCZ introduced us to the Trion series about half a year ago and the first drive already impressed us with its performance versus value offering and now OCZ is back with the next generation of Trion drives. The newly released Trion 150 series brings the newest in TLC NAND technology coupled with a great controller in order to provide an amazing drive for people on a budget. Today I’m taking a closer look at this series as I’ll be testing the 240GB and 480GB models.

The OCZ Trion 150 SSD is aimed at people who want to make the move from traditional mechanical hard disk drives and into the modern flash-based storage. There is no comparison when it comes to performance and access speeds, the SSD wins this by miles. Traditional storage does however have the benefit of more capacity per dollar and that is where TLC-NAND based drives come into play. They offer a great capacity at a lower price compared to MLC or SLC-based drives.

The new drives are built around Toshiba’s own controller and their latest Triple-Level-Cell NAND. This combination allows the drive to achieve a performance up to 550 MB/s when reading and 530MB/s when writing while the random performance still provides up to 91K IOPS reading and 64K IOPS writing. With a performance like this, you’ll seriously decrease your system’s boot-up times as well as any other loading process. It’s also one of those upgrades every system should have, an SSD.

The OCZ Trion 150 is available in a wide variety of capacities which means that there is a size for everyone’s need. It is available in capacities of 120GB, 240GB, 480GB, and 960GB. One of the downsides to TLC NAND is that it doesn’t have the same endurance as MLC and SLC NAND, but that isn’t something that should scare you away as a normal user. Despite the lower endurance, these drives will easily outlive their time of operation in most systems and it shouldn’t be something you need to worry about. The Trion 150 has an endurance rating of up to 240TB total bytes written which should be plenty for almost any normal scenario.

The new 15nm Toshiba TLC NAND used in this series is quite a bit better than the previous 19nm thanks to the optimized manufacturing processes and it shows in this drive. Ordinary flagship drives can easily handle write loads of 50GB data at once, but that’s a problem for most TLC drives. They are just as fast with small area writes as the bigger brothers, but when they have to write more than a few GB in one instance, they suffer some performance loss. To combat this, a part of the NAND is being run in SLC mode as a kind of burst area. You can easily copy large amounts of data to the drive at once, but once the SLC cache has been exceeded, the performance will drop a little bit. The good news here is that the new series offers almost twice the write speed that the Trion 100 was able to offer during these scenarios. That’s a bold statement and one that will be interesting to see if the drive can live up to in the tests.

Despite being a budget drive, the OCZ Trion 150 is still backed by a 3-year warranty and it isn’t just a normal warranty either. OCZ gave the Trion 150 the ShieldPlus Warranty for the entire time and it’s pretty much the best drive warranty you can get anywhere. Especially for free and included. In the unlikely event that a drive needs to be replaced, you got a worry-free customer service experience which eliminates all the hassle and cost surrounding traditional support and warranty claims consumers often have to deal with; OCZ has you covered.

OCZ packed the Trion 150 series with the basic features such as Trim, Garbage Collection, and SMART monitoring, but other than that they don’t feature much. They are, after all, basic drives.

As most SSDs these days, the Trion 150 is also built with a snap-together screwless case that holds the PCB in place. The two drives look the same once I got them opened, but there are a few differences. The most noticeable difference is actual not a difference – the amount of NAND chips. Despite the capacity difference, OCZ used the full set of chips in both models. That’s most likely also one of the reasons that these drives promise as great a performance as they do.

Once we remove the PCBs from the case, we also find another difference on the other side. The 480GB model is utilizing a Micron cache chip while the 240GB has a Nanya chip. Both drives use the same Toshiba controller and 15nm NAND chips.

Feature Highlights

  • Next Gen TLC Technology
  • Superior balance of price and performance
  • 100% Toshiba technology
  • Optimized for lower energy consumption
  • ShieldPlus Warranty

Specifications

Packaging

The Trion 150 comes in a colourful box showcasing the drive design as well as the capacity on the front.

The rear of the box lists the drives features as well as little about OCZ and the Trion 150 drive itself.

Inside the box is a reminder not to return the drive to the shop where you bought it and instead handle possible RMAs through OCZ directly as well as a setup guide and naturally the drive itself.

Mushkin Reactor 512GB Solid State Drive Review

Introduction


After I recently had a look at Mushkin’s Striker SSD, it is now time to take a closer look at the Mushkin Reactor SSD and that’s just what I am doing in today’s review. Mushkin’s Reactor solid state drive promises simultaneous capacity and performance while also keeping the initial costs of purchase in the mainstream spectrum. The Reactor drive is available in three capacities from 256GB to 1TB, but I’m taking a closer look at the 512GB model today.

The Mushkin Reactor is a basic mainstream drive that will be a great solution in any workstation system or gaming rig. It is built around the Silicon Motion SM2246EN controller which is a little cheaper than the Phison S10 for example. In return, we get a drive that is cheaper to purchase. It still delivers a great performance thanks to the use of MLC NAND and it is rated for sequential operations up to 560MB/s reading and 460MB/s writing. The random access performance isn’t bad at all either and the drive comes with a rating of up to 71K IOPS reading and up to 75K IOPS writing.

With solid performance figures like these, the Reactor drive has no reason to hide behind any other competing drives. Capacity wise you got three options in this series where the 512GB model that I’m having a look at today is right in the middle. There’s also a smaller version with 256GB capacity and the larger model with 1TB capacity. That’s a lot of fast storage at an affordable price thanks to clever hardware choices.

The drive has a couple features less than the Mushkin Striker SSD that I recently reviewed, but the basics are well covered on this drive too. The Reactor has the basic S.M.A.R.T. and Trim features as well as early weak block retirement, DataRefresh, and built-in BCH ECC with up to 66 bits per 1kb. The only thing that could be considered missing is DevSleep and that’s only really relevant for notebook users anyway.

Just because the Reactor drive doesn’t have the DevSleep feature doesn’t mean that it wouldn’t be a great upgrade for any notebook, laptop, or ultrabook out there. The 7mm height and default 2.5-inch form factor makes the upgrade quick and easy in either case. The Reactor is also a light drive and that’s something everyone can appreciate for their portable devices. You don’t want to carry any more weight with you than absolutely necessary.

The SATA power and data connectors are default in the sense of pin connectors, as it should be, but they are also another place where Mushkin managed to save a little in order to provide you with a better-priced drive. The connectors are almost transparent when you shine a light on them, but they still appear to be an equal quality when compared to conventional connectors stability.

Mushkin’s Reactor SSD is one of the few drives these days that’s still assembled with screws, which makes my life a lot easier when showing you what the drive looks like on the inside. The enclosure itself is put together with four screws and the PCB is also secured to the case with four screws. In the photo below we also see the thermal transfer pad located on the controller that connects to the chassis. This effectively turns the entire drive into a heatsink and it’s something we’ve seen quite often in other drives because it simply works well.

Having a closer look, we see the Silicon Motion SM2246EN controller next to eight NAND chips from SanDisk.

The other side of the PCB has another eight NAND chips and a Nanya RAM chip as a cache buffer.

Feature Highlights

  • Capacity and Performance
  • Optimal Data Flow: Optimized for dependable and reliable data flow
  • TRIM Support when used with compatible operating system
  • Shock-Resistant: Designed for continued reliable function
  • 3 Year Warranty: Quality guaranteed

Specifications

  • Capacity: 512GB
  • Dimensions: 7mm X 69.85mm X 100.5mm
  • Performance: Up to 560MB/sec (Read) / Up to 460MB/sec (Write)
  • IOPS: Up to 71,000 IOPS (Read) / Up to 75,000 IOPS (Write)
  • MTBF: 1,500,000 hours
  • Controller: Silicon Motion SM2246EN
  • Interface Type: SATA 3.0 (6Gb/s) interface (backwards compatible with SATA 2.0 (3Gb/s) and SATA 1.0 (1.5Gb/s))
  • Temperature Range: 0-70°C
  • Warranty: 3 years limited

Packaging

The Mushkin Reactor comes in a simple blister package that showcases the included drive itself.

It is surrounded by a simple inlay that also shows the drive’s main features on the rear. Other than that, there isn’t much to the package.

QNAP SilentNAS HS-251+ 2-Bay Passive-Cooled NAS Review

Introduction


The first NAS that I reviewed after I joined eTeknix was QNAP’s amazing HS-251 NAS, so it is a real pleasure today as I have the upgraded model in the testing area. I will take QNAP’s SilentNAS HS-251+ for a thorough spin in my testing area and check on its performance as well as show you the latest version of the QTS operating system that was released recently.

The HS-251+ NAS retains the same basic design that provides you with a completely silent NAS. There are no fans or other parts that can generate any noise apart from the storage drives you’ll be using. This design adds another bonus which is a dust-free inside. This is made possible because the entire chassis is used as a heatsink for the entire unit and inserted drives. There are no fans to draw dust and other unwanted dirt into the system. That makes it very easy to maintain, but it also means that it should be placed on top of a shelve rather than in a tight spot where it could have trouble getting rid of the excess heat.

QNAP’s HS-251+ is powered by a quad-core Intel Celeron processor and while some might take a step back here, it’s a great chip for the system. You get four cores that run at 2.0GHz and with a burst speed up to 2.4GHz, it consumes very little power, which also helps with the cooling, and it has more than enough power to drive a system like this. The CPU is backed by 2GB DDR3L RAM and the NAS has a 512MB DOM for the basic system.

Whether you want to mount 2.5-inch or 3.5-inch drives, the HS-251+ can take both. We only got two bays at our disposal here, so most people will probably choose the larger 3.5-inch drives that provide up to 8TB capacity for consumers at the time of writing. Smaller 2.5-inch drives do however run more silently and it produces less heat, so it’s something that is worth to consider in a system like this. The drive bays themselves are hidden behind a removable front that further helps to keep dust out while it also gives the NAS a sleeker appearance.

Connection wise we find two USB 3.0 ports and two USB 2.0 ports next to the two RJ45 Gigabit Ethernet ports. Sadly none of the ports are located on the front or front end of the sides, but it isn’t a big issue with a flat NAS like this. You can easily both reach and view behind the unit. The NAS supports both printer and storage sharing through the built-in USB ports and over the network, which is a thing that can make the household IT-setup a lot easier.

You can also expand the HS-251+ through the use of QNAPs expansion enclosures UX-800P and UX-500P with 8 and 5 drives respectively. This can provide you with up to 80TB raw storage capacity in the HS-251+ using 8TB drives.

Next to those more normal connections, the QNAP HS-251+ also has an HDMI port from which you can connect it directly to your TV and use it for media playback and even run other operating systems in a virtual environment directly from the NAS. The QNAP QvPC technology is awesome and I’ll be showing you some of those features on the following pages. The HDMI connectivity supports 1080p video playback and the NAS also comes with hardware transcoding capability, making the HS-251+ is an ideal companion at home for multimedia entertainment.

Included with the QNAP HS-251+ is also a remote control that makes the usage from the couch a lot easier, more convenient, and in a fashion one is used to from TVs, DVRs, CD players, etc. With this, it is easy to control the playback and navigate the menus without the hassle of a keyboard and mouse.

The newest QNAP operating system, QTS 4.2, brings an even smoother experience than the predecessors with its flat and modern design. QNAP have streamlined loading times and added an intelligent desktop and multi-window operation that makes controlling every aspect of your HS-251+ fully accessible and easy to use.

It’s easy to centralize your all your files and backups in one place with this NAS, as it allows you to create backup jobs to and from the NAS, sync with computers, tablets, and mobile devices as well as the cloud. The real-time and offline HD video transcoding allows smooth playback of all your files no matter what the connection is like and file formats that might not be supported.

You naturally also get all the other great features such as the headless 24/7 download center, surveillance station with up to 40 channels, official mobile apps for all key functions and management, app center with official and third-party apps to increase the functionality even more, alert functions via SMS and Email services, web server, FTP server, Radius server, VPN server, print server, Plex media server, and much more.

The QNAP HS-251+ also supports the Qsirch function that is a QNAP exclusive. It is one of the best search function available that will find anything that you’re looking for on your NAS with ease and a lot faster than any traditional method will. Simply type in as much as you know about what you are trying to find, including bits of the file name or even words/phrases in the document, and Qsirch will display a list of matches, complete with thumbnails, as you type.

Feature Highlights

  • Dual-core CPU with hardware encryption engine
  • Your personal cloud with centralized management, file storage, sharing and backup
  • Real-time & offline HD video transcoding for your mobile devices, PCs, and Smart TVs
  • Supports file synchronization between multiple devices to have most up-to-date files
  • Modern set-top design for your digital lifestyle
  • Storage is expandable through extra units

Packaging and Accessories

QNAP’s HS-251+ comes in a plain brown box with a sticker that shows us what is inside. We get all the details we need on the sticker itself, from hardware specifications to features, so it has everything it needs to have.

Next to the NAS itself, we find a Quick Installation guide, the remote control, a power adapter and power cable from the region where it has ben bought as well as two RJ45 LAN cables inside the box.

D-Link DXE-820T Dual Port 10Gbase NIC Adapter Review

Introduction


Among our recent upgrade to 10 Gbit networking here in the eTeknix review section wasn’t just the awesome 12-port smart switch that we saw a little while ago, D-Link also supplied me with a DXE-820T dual-port 10 Gbit Ethernet Network card to be able to connect with the switch in full speed. After all, what good does a 10 Gbps switch do when my test rig doesn’t have the same kind of performance.

The D-Link DXE-820T is a dual-port 10 GBASE-T RJ-45 PCI Express high-performance adapter designed for the high-speed PCI Express bus architecture. This adapter offers the increased bandwidth needed in modern environments as well as being a reliable and functional PCI network card. It has been specifically designed to allow throughput at rates up to 40 Gbps, thus eliminating the bottleneck that exists with current 32 and 64-bit PCI bus architectures.

The DXE-820T requires a PCI-E v2 x8 or x16 slot for enough bandwidth, but you don’t need to provide any extra power connectors or other things besides your network cables, naturally. The card is capable of a transmitting distance of up to 100m with Cat 6A or higher in 10 GBASE-T mode and up to 100m with Cat 5 type cables in Gigabit mode. This makes the placement of the switch a lot easier.

The DXE-820T features TCP, UDP, and IP checksum offloading functionality, which transfers the checksum processing tasks from the computer’s own CPU and onto the network card itself. The DXE-820T’s ability to handle the checksum processing means that the CPU’s processing power can be used for other tasks while still achieving 20 Gbps network speeds. It also means that the network card needs some extra cooling in the form of an active fan as well as a passive heatsink.

The adapter also features an onboard screening of 802.1Q VLAN tagged Ethernet frames, allowing you to assign multiple subnets to each server and isolate devices within each VLAN from the rest of the network for better traffic control and security. With support for advanced features such as 802.3x flow control, jumbo frames, and SNMP for network management, the DXE-820T can easily interoperate with your current networking equipment.

With two ports at your disposal, you can increase the network throughput even further than the 10 Gbit per second on each port. With Smart Load BalancingTM, the DXE-820T can configure multiple adapters to work as a team, sharing traffic and ensuring data reliability. This both creates a faster network and provides fault tolerance resulting in a stable and efficient network.

The low profile design allows the deployment in space restricted areas and D-Link also included a low-profile slot cover right away. The card itself is powered by Broadcom’s BCM57810 chip.

The card naturally supports Jumbo Frames for optimized setups and it allows for values up to 9K. The DXE-820T is compatible with all major operating systems with drivers available for both user systems and server systems such as Windows Server 2012 or Solaris 11.

Feature Highlights

  • High-Speed data transmission at rates up to 40Gbps allow for seamless data transfer.
  • 10GBASE-T technology supports distances to 100m over CAT6A or better copper cable.
  • Advanced Features: 802.3x flow control for traffic management, 802.1Q VLAN tagging for increased security, and checksum offloading to reduce CPU processing burden.
  • Bandwidth Management: NIC partitioning enables administrators to manage bandwidth for greater network efficiency.

Specifications

Packaging and Accessories

The DXE-820T NIC card comes in a very neutral box that only really reveals that we have a D-Link product inside. But it’s a network card and it isn’t like you would put the box in the display after installing the card anyway, so simply is good.

We do find a little sticker on the rear of the box that reveals what is inside, the model number along with serial, mac address, and hardware version.

There is both a driver disk and a quick installation manual inside the box, and D-Link also included a low-profile bracket for use in small-form-factor systems. Everything you need to get going with that extra speed.

Mushkin Striker 480GB Solid State Drive Review

Introduction


It has been a while since we had a closer look at Mushkin’s lineup of solid state drives which makes today’s review a little more interesting than just looking at a great perming drive. On the test bench today is the Mushkin Striker 480GB 7mm slim solid state drive and I’ll put it through the usual tests to see how well it performs.

Mushkin built the Striker series with a performance that should satisfy the most demanding users, at least on the SATA3 connection. The Striker is built with Phison’s PS3110-S10 quad-core 8-channel controller which is coupled with quality MLC NAND. Three of the cores are dedicated for flash management and the controller also supports 256-bit AES encryption and Opal 2.0. These things coupled make for a great performing drive and this 480GB model is rated for up to 565 MB/s read and 550MB/s write speeds. The IOPS are rated around 90K for both read and write.

Performance is only one aspect of a drive, it also has to be reliable and keep your data error free. The Phison PS3110-S10 controller supports end-to-end data path protection, SmartECC, SmartRefresh, SmartFlush, and GuaranteedFlush. The end-to-end data protection makes sure that the data stays uncorrupted during the travels through the different parts of the hardware until it reaches the NAND flash.

SmartFlush is a proprietary algorithm to minimize DRAM utilization for user data. The Smart On-the-fly Flushing and Smart Triggered Flushing constantly flush data and re-organize random data chunks in the cache to minimize the time data stays in the cache as well as keep your data safe.

SmartRefresh consists of two parts that essentially are the wear-leveling algorithms. The run-time media scan and idle-time media scan detects ECC bit during read and idle operations and reallocated data to healthy blocks when the ECC bit exceeds the threshold.

Overall, the drive has all the features that you will want in a drive and that should make sure that you have a great performing drive for many years to come. Next to the ECC, garbage collection, and wear-level algorithms, the Mushkin Striker also supports DevSleep (DEVSLP), TRIM, and SMART.

The drive in itself is very plain with its simple black enclosure and sticker on the top. You’ll find all the relevant information such as serial number and capacity on that label, and what else do you need on a solid state drive? Mushkin backs the Striker SSD with a 3-year warranty and it’s also worth mentioning that drives all are assembled in the US.

Inside the two-piece snap-together enclosure is a 2/3rd length PCB. One side holds four of the NAND chips as well as the Phison S10 controller and the Nanya cache chip.

On the other side of the PCB are four more NAND chips in order to provide the 480GB capacity.

Feature Highlights

  • 3-Year Warranty
  • Optimal Data Flow
  • TRIM Support
  • Schock-Resistant
  • Extreme Performance

Specifications

Packaging

The Mushkin Striker comes in a simple blister package that showcases the included drive itself on both sides.

It is surrounded by a simple inlay that also shows the drive’s main features on the rear. Other than that, there isn’t much to the package.

MyDigitalSSD BP5e Bullet Proof 5 Eco 240GB SSD Review

Introduction


In today’s storage review, I’m taking a closer look at a solid state drive from a company that we don’t test quite as often, but it isn’t the first MyDigitalSSD drive have tested either. The newest MyDigitalSSD drive is the BP5e that stands for Bullet Proof 5 Eco and it is a 7mm slim solid state drive that will fit into pretty much any system for a performance boost over a mechanical hard disk drive. The new BP5e series comes in capacities from 240GB and up to 960GB, and the large size is one that becomes more and more popular due to decreasing prices. I’m however taking the 240GB drive for a spin today, a perfect entry-level drive.

There were a few hints in the first paragraph such as Eco and mechanical drive replacement, so you might already have guessed that this isn’t a new flagship drive but rather a budget drive for those that wish something that is faster than a traditional hard disk drive, but don’t want to spend a lot of money at the same time.

The new MyDigitalSSD BP5e drive is built with Triple Level Cell (TLC) NAND which lowers the production cost at the same time as it increases the possible capacity on the same size, but it does come with a few drawbacks. TLC NAND doesn’t have the same endurance as MLC and the performance of long-lasting copies will be affected, how much will be shown in our benchmarks on the following pages.

The TLC NAND is made my Toshiba and it is their TLC Toggle 2.0 NAND. It is paired with Phison’s newest S10 controller (PS3110-S10) with the latest firmware for optimal performance. The two coupled should provide some great reading speeds as well as writes. The drive is rated for up to 565MB/s speeds, but that’s just when reading.

MyDigitalSSD ships each BP5e drive over-provisioned for improved Random Read/Write performance and IOPS, extended performance endurance to minimize sluggishness as the drive fills with data, prolonged drive life, added drive reliability, and low power consumption.

The BP5e in itself is a very simple drive composed of a black two-piece snap-together enclosure with a sticker on the top. Inside we find a 2/3-long PCB that only utilizes the one side with four Toshiba TLC NAND chips, the Phison S10 controller, and a Nanya 128MB DDR3 cache chip.

Feature Highlights

  • Unequaled price to performance ratio
  • PHISON PS3110 controller
  • Toshiba TLC Toggle Flash
  • Large storage capacity
  • Easy installation
  • High-speed SATA 6Gb/s (SATA III) interface – Backward compatible to SATA 3Gb/s (SATA II)
  • Withstand extreme shock and vibration
  • Support DDR3 I/O interface
  • Power management supported
  • NCQ command set. TRIM, RAID, and SMART support
  • 2-year warranty

Specifications

Packaging

The package is quite colourful and presents a full-colour image of the drive itself along with the name and what it can do right on the front.

The rear of the box has a little more information about the drive itself along with a feature list and a capacity sticker to show what model is inside.

Inside the box, we only find the drive itself and no other accessories. Not like we need a long installation guide to connect a storage drive, it’s not rocket science. A penny saved on production can make the difference in the retail pricing.

 

D-Link DIR-890 AC3200 Ultra Triple-Band Wi-Fi Router Review

Introduction


When you pick the router you want to own, you can either pick an ordinary router for your setup or a great one if you want just a little more. But there is also a third option and you have the choice to go for something extraordinary. Today I’m taking a closer look a router from the last category as I’m having D-Link’s impressive DIR-890L AC3200 Ultra Wi-Fi router in my testing area.

The DIR-890L brings impressive performance via three bands instead of the normal two bands, and it also comes packed in a stylish design with six antennas for maximum range, coverage, and speed. D-Link’s DIR-890L has a futuristic kind of design that somewhat resembles a drone or spaceship. A lot of the times this kind of designs can go too far, but D-Link seems to have nailed it and hit just the right spot between normal, futuristic, functionality, and design. It looks great!

We get more and more smart devices in our homes and that is something that increases exponentially the more people live in the household. We have smart TVs, smartphones, laptops, tablets, game consoles, computers, and much more. All of these need an internet connection through our one and only entry and exit point, the router, which means that we quickly can reach limits around the available bandwidth and channels, and we experience bottlenecks and lag.

Traditional routers have a 2.4GHz band for up to 600Mbps throughput that is suited for surfing, emails, and instant messaging as well as the newer 5GHz band that has a little less range but a lot more performance. D-Link added one more on top of that in the DIR-890L AC3200 router, they added a third band. The third band is another 5GHz band, freeing up some space on the first one by balancing the connections out. It also prevents slower connected devices from bottlenecking the band from faster ones. Each of the 5GHz bands has a maximum throughput of 1300Mbps which gives the DIR-890L a total wireless throughput of 3200Mbps. Effectively this is like three routers in one.

As mentioned above, not all wireless bands are the same, but that isn’t something you need to worry about with this router. The Smart Connect Technology allows the router to choose from the three Wi-Fi bands and automatically connect each device on the network to the best and clearest band available at the time of connection.

The Smart Connect feature is awesome as it manages everything itself and removes any worry from the user’s end what band to pick and choose from. You can still choose to use each band separately with their own individual SSID name and password settings should you wish to do so.

D-Link gave the DIR-890L six antennas and the router features beam-forming technology to improve coverage. With this technology, the router can direct the bandwidth in the direction of the devices connected and thereby give you a better overall connection experience whether you stream your movies, Skype with friends, or play online games.

The six antennas are adjustable in almost all directions, except down. So unless you want to place it upside down, then you can’t have it look like a spider on six legs as some of you probably already imagined. It is not something I would recommend doing as it would place the vents upward and allow for more dust to settle inside the router. You sadly can’t replace the antennas with aftermarket ones on the Ultra AC3200 and that might be a downside for some people.

The router naturally also features wired connections and not just wireless ones, although the wireless features are the selling point in this router along with the great hardware base. You get one WAN port for the internet connection and four Gigabit Ethernet ports for your LAN. The DIR-890L also comes with one USB 3.0 and one USB 2.0 port for file sharing from external storage drives or creating a network printing environment from your old USB-based printer. The D-Link share port allows all this with ease and also allows you to use the built-in DLNA server and stream to compatible devices.

D-Link also packed the router full of useful software features such as parental controls, blocking of unwanted devices, internet activity monitoring, and Wi-Fi guest networks. Intelligent Traffic Prioritization selects the fastest Wi-Fi for every device and prevents older devices from affecting optimal performance. VPN setup and all common features such as NAT and port forwarding aren’t a problem for the DIR-890L either.

There are a lot more features, but we’ll see them on the following pages when we take a look at the user interface and options. If all that shouldn’t be enough, or you just don’t like the interface for some reason and would like something else, then you can flash the router with DD-WRT, the open-source router firmware. The D-Link AC3200 Wi-Fi Router should be fully compatible with the open source Linux-based router operating system.

If all that shouldn’t be enough, or you just don’t like the interface for some reason and would like something else, then you can flash the router with DD-WRT, the open-source router firmware. The D-Link AC3200 Wi-Fi Router should be fully compatible with the open source Linux-based router operating system.

All this requires some power to run and that comes from a 1GHz dual-core processor that has no trouble keeping up the data packets for your gaming sessions or 4K media streaming. Speaking of 4K media streaming, the DIR-890L is a Nvidia GameStream-Ready product and certified for optimal compatibility with the newly released Nvidia Shield 4K Android TV Console.

Specifications

Packaging and Accessories

A Premium router also needs a premium package, and the D-Link AC3200 Ultra Wi-Fi Router has that. The huge box has a premium finish and is made from thick cardboard. The outside has a full-colour print with the router itself and the name on the front.

The rear of the box displays the main feature highlights in a graphical way, easy to see, read, and understand.

It isn’t just a folded box around an inlay either, but a real box where you lift the cover up.

Inside you see the beautiful router right away, safely secured and with the accessories packed in the boxes on either side.

Inside is a power cord, AC power adapter, and an RJ45 LAN cable to connect your new router.

There’s also a beautiful Quick Install Guide to help you get started, a configuration card with all the default settings and room to write you own as well as an extra sticker with the defaults for you to place where it is convenient.

Silicon Power Slim S70 240GB Solid State Drive Review

Introduction


Continuing our reviews of the Silicon Power solid-state drives, we’ve gotten to the Slim S70, a mid-ranged performance drive in the 7mm thin Slim series perfect for notebooks as well as desktop systems.

The Silicon Power Slim S70 is available in 5 capacity version all the way up to 960GB. The smaller capacities available are 120GB, 240GB, 480GB, and 960GB and I am taking a closer look at the 240GB model today. The drive is rated for a sequential read performance up to 550MB/s reading and 500MB/s writing, which shouldn’t be any trouble to achieve for the hardware inside.

The Silicon Power Slim S70 SSD is built with a Phison S10 controller which has proven itself in numerous drives and comes with synchronous NAND flash. The Slim S70 has all the basic features that an SSD needs to have, including S.M.A.R.T., TRIM, Garbage collection, NCQ, and wear leveling. It is also RAID ready for those who want even faster setups with all the features available. Silicon Power also included error correction code to guarantee data transmission reliability.

Making the upgrade from a mechanical hard disk drive to a solid-state drive is something that everyone needs to experience, there simply isn’t any comparison. An SSD isn’t just a lot faster, it also consumes less power which is great for stationary systems as well as mobile ones. There are no moving parts and thereby no noise or vibration and it makes it more shockproof than traditional storage drives. You also eliminate latency delays and seek errors.

The SP Slim S70 is also available as upgrade kits that include a shockproof enclosure, screwdriver, and NTI Echo cloning software for an easy upgrade in three steps. It also allows you to use your old drive as an external portable drive afterward. The included enclosure provides rugged protection against shocks, scratches, and abrasions, and it features a cable wrap-around design for easy portability.

Inside the two-piece screwless enclosure, we find a 2/3 sized PCB with four NAND chips on each side. The controller is a Phison PS3110-S10 and the NAND should be Toshiba 19nm MLC NAND from the DP58G5LAPA inscription. There is also a Nanya 128MB cache chip on the top. Funny enough, it looks to be the exact same layout and parts as we saw in the SP Slim S60.

Features

  • 7mm slim design suitable for Ultrabooks and Ultra-slim notebooks
  • SATA III 6Gbps backward compatible with SATA II 3Gbps
  • Super-high transfer rate: 520MB/s max. Read speed / 460B/s max. Write speed
  • Random 4K write speed up to 86000 IOPS
  • Supports TRIM command and Garbage Collection technology
  • NCQ and RAID ready
  • Equipped with wear leveling, to extend endurance
  • Implemented with ECC technology to guarantee data transmission reliability
  • Built-in with SMART monitoring system
  • Low power consumption
  • Shockproof & Anti-Vibration
  • Noiseless operation, no latency delay and no seek error
  • 5-year warranty

Packaging

The Silicon Power Slim S70 comes in a simple blister package displaying the included drive itself on the front. At the same time, it also displays the main features, 5-year warranty period, and slim drive height.

The rear of the package has the basic feature list in multiple languages as well as the average performance increase one would gain compared to a mechanical drive.

The leaflet inside the package opens up for a simple installation guide, feature list, and specification.

Seagate Enterprise NAS 6TB HDD Four Disk RAID Review

Introduction


We’ve already had the pleasure of a single drive review of Seagate’s Enterprise NAS 6TB HDDs and today it has become time for the RAID review. Thecus provided me with five of these drives, but I’ll only be using four in this review today. Four is a magic number when it comes to RAID and the fifth drive would most likely be set as global spare in most systems anyway, so no point in added it. Four drives also give us a great consistency with other RAID reviews done in the past.

Seagate’s Enterprise NAS drives come in capacities ranging from 1TB and all the way up to 8TB, but I only got the 6TB models in today. The Enterprise NAS series is designed for cloud-based systems and NAS application. They offer support for the use in systems with up to 16 drive bays which is a double up compared to what consumer NAS drives offer. It is very important to use a drive that is properly suited for your area of operation and not just pick any random cheap drive from the shelve. A farmer wouldn’t use an SUV to plow his fields either, it’s just not built for the task. So forget all about misleading Backblaze reports as the figures, features, and warranties speak for themselves here.

The 6TB Seagate Enterprise NAS HDD comes with 128MB cache and a spindle speed of 7200RPM. This is quite a bit more than the variable speeded drives that come with a maximum speed of 5400RPM. This makes the drives a little louder, but the Enterprise NAS HDD is surprisingly silent compared to other 7200RPM drives and only generates 2.5 bels during idle and 2.7 bels maximum during seek operations.

The average seek times are set to 8.5ms reading and 9.5ms writing. The performance is rated with up to 216MB/s sustained data rate and an average read/write rate of 154MB/s. You can run the drive in harsher environments as the Enterprise NAS HDD will work from zero to 70 degrees and can withstand up to 70Gs shocks at 2ms read and 40Gs at 2ms write. This 6TB version is built with 12 heads total for the 6 1TB disks it houses.

The Enterprise NAS drives have a long endurance and great workload ratings. The endurance is rated for 300TB a year and they have a 1.2 million hour mean time before failure rating. Seagate is also backing these drives with a 5-Year warranty and also offers optional 5-Year Rescue Data Recovery options.

The available Rescue Data Recovery Service options can save the day when the worst case scenario happens. It is an extra feature that you might want to consider when dealing with your important data. Any company is more or less lost when they lose their digital data. Seagate Recovery Services (SRS) can save the day in the following situations: RAID controller failure, Lost RAID configuration, accidental reconfiguration, accidental re-initialization of the RAID array, power surges that cause multiple drive failures simultaneously, missing RAID partitions, reformatted RAID partitions, virus damage, natural disaster, human error and drive failures. Most data can be recovered in-lab with a nearly 90% success rate.

The drives are built on customer proven technologies coupled with the newest density platters that allow for lower power consumptions, smaller overall footprint, and lower total cost of ownership over previous drive generations. The RV sensors provide strong reliable performance and the controller is flashed with NAS-optimized firmware for balanced reads and writes.

The drives naturally support ATA8 streaming commands, NCQ, and are performance tuned for RAID applications. On-the-fly ECC algorithms make sure that the data arrives as it should and S.M.A.R.T. allows you to check on the drives status and health.

The PCB of the Seagate Enterprise NAS 6TB HDDs is well protected and the HDD controller and motor controller both feature heat transfer pads to help them stay cool in hot environments. The 128MB cache on the HDD is provided by an SK Hynix chip.

Features:

  • Enterprise-class reliability and performance for cloud-based storage and NAS applications in 1- to 16-bay enclosures
  • 1.2 million hours MTBF for enterprise-class reliability
  • 300TB-per-year workload rating for mid-range NAS and cloud-based storage
  • Backed by the Seagate 5-Year Limited Warranty
  • 7200-RPM spindle speed performance
  • Double the cache size, 256MB multisegmented on 8TB capacity, 128MB on the other sizes
  • Dual-stage actuators to deliver precision seeks every time
  • SATA 6Gb/s interface for easy integration into NAS and RAID rackmount systems
  • RV sensor for sustained performance and reliability
  • Optional 5-year Rescue Data Recovery Service plan protects against data loss in NAS and RAID environments.

Specifications

The specifications are taken directly from the manufacturers homepage at the time of the review and might as such be subject to possible future changes.

Silicon Power Slim S55 240GB Solid State Drive Review

Introduction


I have already had the pleasure to review a few storage products from Silicon Power and today I’m having the second solid state drive of theirs on my test bench for a closer look at what it can perform: The Silicon Power Slim S55 240GB solid state drive.

Silicon Power’s Slim series of solid state drives all come with a 7mm thickness, making them perfect for ultrabooks and similar portable computers that require this form factor. Traditional 2.5-inch mechanical drives mostly come with a 9.5mm thickness, ruling them out as an option. The Slim S55 SSD is the little brother in this series, but it doesn’t need to be ashamed of that.

The Silicon Power Slim S55 is designed for the budget minded consumer that doesn’t want to compromise performance at the same time. Taking the move up from a mechanical hard disk drive or a solid state hybrid drive and to a real SSD can make a world of difference and the SP Slim S55 would be a great option here. It is available as just the drive itself, as I’m testing and reviewing today, but it is also available as an upgrade package with included shockproof external enclosure and cloning software to make the switch as easy as possible. A few clicks with the included NTI Echo 3 cloning software and your laptop is ready to rock with solid state drive speeds.

A solid state drive is an optimal choice for any portable computer, it has a higher reliability and durability than a mechanical HDD does. It doesn’t have any moving parts that generate noise, it consumes less power, has a higher shock resistance, and a throughput that is a lot higher.

The Silicon Power Slim S55 connects through a default SATA3 interface that’s also backward compatible with previous generations. Connecting it to a slower bus naturally also impacts performance, but it is one of the nice things about the SATA connector: Combability. The Slim S55 is rated for a performance of up to 520 MB/s while reading and up to 460 MB/s when writing.

Feature wise we find all the basics and as well as a little more. The Slim S55 supports TRIM and Garbage Collection, Native Command Queuing and it is RAID ready. S.M.A.R.T. is also supported and it comes with built-in Error Correction Code. The only thing that’s missing a little bit is the DeviceSleep feature and maybe encryption support, but you can’t get it all when you go down the budget route.

Silicon Power offers the Slim S55 solid state drive in five different capacities, making sure there is an optimal choice for everyone. Users that only need a little space because they run an Android or ChromeOS, or possible store most data in a personal or commercial cloud environment will find great options here just as users that require more space for a complete windows installation with games and programs will. The Slim S55 is available with 32GB, 60GB, 120GB, 240GB, and 480GB capacity. All of them are backed by a 3-year warranty.

Opening up the drive and having a look inside and we see what the drive is made of. We find a 2/3 sized PCB featuring a quad-core Phison PS3110-S10 controller that should give a great performance at both sequential and random operations. There are four NAND chips on the top and another four on the rear, making up the total of 240GB capacity. We also see a Nanya 128MB DDR3 cache located on the top.

Features

  • 7mm slim design suitable for Ultrabooks and Ultra-slim notebooks
  • SATA III 6Gbps, backward compatible with SATA II 3Gbps
  • ATTO high transfer rate: Read speed: 520 MB/s max; Write speed: 460 MB/s max
  • Smartest Choice for System Upgrade
  • Supports TRIM command and Garbage Collection technology
  • NCQ and RAID ready
  • Implemented with ECC technology to guarantee data transmission reliability
  • Built-in with SMART monitoring system
  • Low power consumption
  • Shockproof & Anti-Vibration
  • Noiseless operation, no latency delay and no seek error
  • 3-year warranty

Packaging

Silicon Power wrapped the Slim S55 in a blister package that displays the included drive directly through the front while it also highlights the drives features and 7mm slim-type.

On the rear, we can find a few more information such as how much better it is than a traditional hard disk drive as well as a list of the basic features NCQ, TRIM, and RAID readiness in several languages.

Inside the blister pack is the drive itself and the leaflet folds out into a small manual and getting started guide that highlights the features, specifications and setting description.

New Kingston Cloud Revolver Headset @ CES 2016

CES 2016: Kingston are already a popular choice for PC gamers, after the massive success of their Cloud and Cloud II gaming headsets. Now they’ve back with a completely new design, the HyperX Cloud Revolver headset, and this time, it’s a fully Kingston designed headset, no help from other parties such as QPAD.

The design certainly looks great, and the headset feels like a premium product and well ballanced. Equipped with new 50mm drivers, Kington promise they’ve finally made a Cloud beater, but we’ll have to wait and see.

The headband design is self adjusting for the perfect fit every time.

And there’s a soft leather padding for excellent noise suppression on the interior of the ear cups. Other than that, you can find a new microphone, which is said to be even better than the old one, so it’s certainly something we’re looking forward to testing later this year.

The new headset is expected to launch in Q2, with an RRP of $120 and $150 for the 3,5mm and USB versions resectively.

ADATA Premier SP550 240GB Solid State Drive Review

Introduction


I’ve had the pleasure to review several new drives with triple-level-cell (TLC) NAND recently and today it is time to take a closer look at ADATA’s Premier SP550 solid state drive. The drive is equipped with said TLC flash and an SMI controller to provide an affordable performance upgrade. The ADATA Premier SP550 is available in capacities from 120GB and all the way up to 960GB, I’m however taking a closer look at the 256GB model today.

Let us start with the basics. The ADATA Premier SP550 is a 2.5-inch solid state drive with a 7mm height that makes it a perfect fit for ultrabooks. ADATA also packed a drive spacer along for notebooks that require a 9.5mm drive. This makes it suitable for almost any system, mobile or stationary.

As previously mentioned, the SP550 utilities TLC flash and an SMI2256 controller that comes with all the features that you want and a couple more. The drive naturally supports the basics such as NCQ, SMART, TRIM and Garbage collection, but it also features a low-density parity check error correction code (LDPC ECC) and RAID engine. The drive also supports SLC Caching and comes with a DDR3 DRAM cache buffer for sustained transfer speeds. All that along with Data Shaping technology should ensure data integrity and stability.

The endurance is rated for 90TB total bytes written (TBW) and the SP550 has a mean time before failure rating of 1.5 million hours. The 240GB model is rated for a sequential read performance up to 560MB/s and a sequential write performance up to 510MB/s. That is pretty good for a small drive that’s TLC based. The random performance is rated for 75K IOPS on both read and write operations. Part of the good performance rating comes from the intelligent SLC caching algorithm of the drive that allows NAND flash memory to operate in SLC mode and boosts SSD read and write performance.

A feature not mentioned above is the DevSleep, or Device Sleep, that in supported systems will send the drive to an even deeper sleep state where it consumes close to zero amount of power. Instead of keeping a data channel open for a wake-up signal, the DevSleep uses a power signal to wake the drive back up.

ADATA also got an SSD toolbox that makes maintenance of the drive an easy thing. You can quickly and conveniently configure, optimize, and monitor SSDs, from overall status to specific drive health and lifespan info. Speaking of lifespan, the ADATA Premier SP550 is backed by a 3-year warranty.

Inside the two-piece encasing, we find a 2/3 sized PCB where we see that nothing but quality components were used. The NAND is rom SKhynix, the cache from NANYA, and the controller from Silicon Motion.

Features

  • TLC flash with SMI controller Capacity Model Number EAN Code
  • Advanced LDPC ECC Technology
  • RAID Engine & Data Shaping for ultimate protection
  • Intelligent SLC Caching for improved performance
  • High TBW for extended drive longevity
  • DEVSLP (Device Sleep) supported

Specifications

  • Capacities: 120GB / 240GB / 480GB / 960GB
  • Controller: SMI
  • NAND Flash Memory: Toggle TLC (3-bit MLC)
  • 7mm 2.5-inch SATA 6Gb/sec (SATA III) interface
  • ECC Capability: Advanced hardware LDPC engine
  • Dimensions (L x W x T): 100.45 x 69.85 x 7mm *Varies depending on exact configuration
  • Operating Temperature: 0~70°C
  • Storage Temperature: -40~85°C
  • Shock Resistance: 1500G/0.5ms
  • Weight: 68g / 2.4oz
  • MTBF: 1,500,000 hours
  • Warranty: 3 years

Package and Accessories

ADATA packed the SP550 in a simple white box that has a transparent window showcasing the included drive itself. The front also features all the relevant features that the drive sports.

The rear of the box has all the details in multiple languages as well as the rated speeds.

Inside the box we find the drive itself as well as a 9.5mm drive adapter and a quick start guide.

Synology DiskStation DS416 4-bay High-Performance NAS Review

Introduction


I’ve taken a look at quite a few 2-bay NAS units lately and while they already allow for an impressive 16TB raw storage, that might not be enough for everyone. Today I’m taking Synology’s DiskStation DS416, a 4-bay feature-rich and high-performance NAS server, for a spin on my test bench. The Synology DiskStation DS416 is built around an Annapurna Labs Alpine AL-212 32-bit dual-core CPU with 1.4GHz, floating point unit, and hardware encryption engine. The CPU is backed by 1GB DDR3 memory that sadly isn’t upgradable.

The DS416 is a full-fledged NAS that comes with everything you’d want from a performance system. It features dual Gigabit Ethernet network that supports all types of failover and link aggregation, allowing you to keep your system connected under heavier load or when one connection should fail. The DS416 also features three USB 3.0 ports where one of them is conveniently placed on the front of the NAS for easy access.

With powerful hardware like that, the DS416 is able to deliver an average reading and writing speeds of 220 MB/s and 140 MB/s respectively while encrypted file transfers come in at an evenly impressive 146 MB/s reading and 65 MB/s writing. Those figures naturally depend on what hard disk drives you use as well as the method of data access and your network setup.

The drive bays feature a convenient tool-free drive installation for 3.5-inch drives where as you still need screws to mount 2.5-inch drives. The latter is a rare occurrence anyway and shouldn’t be anything to bother anyone. The drive bays are covered by a removable front plate that gives the NAS a cleaner overall look by hiding away the drives. The drive bays aren’t the only thing that you can swap out in this NAS, the fans are also redundant. The DS416 incorporates a passive cooling design on the actual components and only uses two 92mm fans on the rear to keep everything at an optimal temperature. When the system detects a fan failure, the built-in redundancy mechanism ensures continuous operation until the replacement fan arrives.

The DS416 is naturally powered by DiskStation Manager (DSM), the award-winning operating system from Synology. It has a beautiful and functional user interface and all the features you will need at home or in a small to medium-sized business. It offers all the network protocols you’d want including SMB2, AFP, NFS, WebDAV, and FTP. Server admins don’t need to worry about maintaining two set of user credentials either as the DS416 comes with both Windows AD and LDAP integration. An added convenience factor is the network recycle bin that is featured on AFP, CIFS, File Station, and WebDAV. All files deleted in a shared folder will be automatically moved into the Recycle Bin instead of being destroyed.

The DS416 isn’t just an all in one server when it comes to features, it also has the power to handle it. You can easily turn your DS416 into a mail server with webmail interface, set up a VPN server connect as a VPN client, create a print server for USB printers and much more such as Radius server, Proxy server, and Syslog server features.

Creating your own personal yet comprehensive cloud solutions is no problem either with the DS416 thanks to the Cloud Station package.It is the perfect package to sync files across multiple devices, perform offline edits and later synced them, and keep up to 32 historical versions for easy restoration. You also got all the normal backup features that you’ll want such as 2-way sync between different DiskSations as well as support for commercial cloud services such as Glacier Backup and HiDrive Backup.

The Synology DiskStation DS416 has a comprehensive security package, starting with AES 256-bit encryption but also more advanced setups like 2-step verification. It also comes with AppArmor that can block malicious programs from accessing unauthorized system resources and you can customize the trust level in the package center to only accept apps from certain publishers. The built-in firewall is another useful feature just as the Denial of Service (DoS) protection. Antivirus can also be downloaded and installed for that extra level of security. Overall, everything you need to keep your data safe from malicious code and people.

Synology also offers a row of mobile apps that you can use to easy connection and usage of your NAS from your mobile devices such as tablets and smartphones. The apps include DS note, DS audio, DS video, DS photo+, DS cloud, DS file, DS download and DS cam.

Feature Highlights

  • Dual-core CPU with hardware encryption engine
  • Dual LAN with failover and link aggregation support
  • Over 221.05MB/s reading, 139.51MB/s writing
  • Effective backup solution for all desktop and mobile devices
  • Front USB 3.0 for fast easy access
  • Hot-swappable & tool-less hard drive tray design
  • Running on Synology DiskStation Manager (DSM)

Packaging and Accessories

The Synology DS416 comes in a simple brown package with a sticker for model inside. It has all the relevant features presented as well as an image of the unit that is inside.

The rear of the box has a second sticker with some of the hardware highlights.

Inside the box, next to the NAS itself, you’ll find an AC adapter with power cable for the region where you purchased it, two RJ45 LAN cables, screws for use with 2.5-inch drives, and a Welcome and Quick Installation Guide. Everything you need to get it setup and I like that Synology included two LAN cables so users can get port trunking up and running right away.