Toshiba Reveals Its 6TB Internal and External Drives

Toshiba has announced a 6TB capacity version of its Canvio Desk 3.5″ External USB 3.0 Hard Drive and Desk 3.5″ Internal Serial ATA 3.0 Hard Drive series, both of which are designed to extend capacity of your storage either as an upgrade or extension.

“Toshiba has been developing and manufacturing hard drives for more than 20 years,” said Maciek Brzeski, Vice President of Branded Storage Products, Toshiba Digital Products Division. “The time is right to upgrade our offerings not only to meet, but to exceed consumers’ expectations by expanding the offerings of our internal and external 3.5″ hard drives.”

The Toshiba Canvio Desk 3.5″ Internal and External Hard Drives will be available on the market in May 2015 at select retailers and on Toshiba’s Website. Both internal and external drives are set to come with a price tag of $369 and be accompanied by a three-year Standard Limited Warranty in the Americas.

Thank you Guru3D for providing us with this information

Enermax EMK3104 Hybrid 2.5-inch Docking Station Review

Introduction


There are many types of drive enclosures on the market; some are internal, some are external and some are hybrids. The Enermax EMK3104 Mobile Rack is a hybrid solution and a smart one at that.

The enclosure can take 2.5-inch hard disk and solid state drives and convert them into a 3.5-inch standard sized drive. This allows the easy use of a smaller 2.5″ drive in a 3.5″ drive bay that otherwise wouldn’t allow the use of them.

But it does more than that, it also allows easy front access to switch and replace the drive, or just remove it. It also allows you to lock the drive to both prevent tampering with your drive as well as accidental ejection.

On the inside, it uses a patented non-scratch SATA connector to guarantee a maximum life span with up to 50.000 drive insertions and it can handle both SATA III and SAS drives.

The Enermax EMK3104 doubles as a mobile disk rack and allows you to connect it via USB 3.0 instead of using the normal SATA connectors on the rear. To the rear of the enclosure, you’ll find a micro USB 3 connector and the cable needed is included with the drive array.

If it was to be docked in a 3.5-inch drive bay, you could just eject it and take it with you as USB 3.0 portable drive.

The hot-swap system allows you to quickly change the HDD or SSD when you need another one. Inside is a simple mechanism that will eject the drive when opened and automatically retracted it when closed.

When enclosing a drive in such a small space, you’ll need to make sure that it stays cool. To aid this, the EMK3104 has an aluminum cover on the top and ventilation holes on the bottom. This should provide the best passive cooling capability.

 

Aerocool Launches DS 200 Midi Tower With Special Insulation and Built-In Fan Controller

Aerocool has launched a new addition to its Dead Silence chassis series, the DS 200, sporting a variety of features, such as having both side-panels equipped with special insulation mats in order to reduce the noise inside the PC. In addition to the latter, the DS 200 also features an integrated fan controller as well as 0.8 mm SECC material.

The company distinguishes the DS series from the rest of the products by granting a variety of color options, having the DS 200 coming in six colors: classy black, black/white, red, orange, blue and green. It is said that all chassis options equipped with a special top-cover which can be removed and replaced by a mesh-style cover in order to boost the airflow capacity. Aerocool even offers an optional side panel window for customers who would like to show off their build.

The built-in fan controller is another interesting feature, having it be located on the topside of the chassis. It is said to support a total of 25W shared by three channels, having the fans be controlled simultaneously. The fan controller is said to have three speed options, namely low, medium and high, while also boasting the capability of stopping a fan channel when needed. The temperature is said to be displayed on the large round display, having to choose from seven color options for the display illumination. Lastly, the I/O panel is said to feature two USB 3.0, two USB 2.0, and HD audio and a microphone connector.

On the inside, the DS 200 is said to have enough space for even the latest hardware components, a tool-free rack for both optical and disk drives and support for the ATX, Micro-ATX and Mini-ATX. The company states that up to five 3.5″ HDDs or seven 2.5″ HDDs/SSDs can be mounted inside the case, as well as VGA cards with a length of up to 29 cm (41 cm if removing the center 3.5″ cage). When it comes to cooling, the DS 200 is said to offer support for both air and water cooling solutions, having room for big CPU cooler with a length of 17 cm as well as several pass-through openings with rubber protection located in the mainboard tray. Aerocool states that 240 or 280 mm water-cooling solutions can be mounted in the front or the top of the DS 200, having enough room for even a PSU of 22 cm in length.

In terms of noise output, the DS 200 is said to have both side panels insulated with mats, while having all the 2.5″ and 3.5″ bays as well as the PSU equipped with anti-vibration shock-proof rubber. In addition to the latter, two silent case fans are pre-equipped and ready to provide steady airflow out of the box. Aerocool has stated to also introduce the “Lite Edition” option, which includes the DS 200 with standard non-insulated side panels and comes without the center 3.5″ cage and auto-eject front-panel.

When it comes to prices, Aerocool is said to offer the entry-level DS 200 Lite Black Edition at a price of $120.90, the Black Edition at $158.90, while the Red, Orange, Black/White, Blue and Green Editions are said to all come at the same $163.90 price tag. Additionally, the DS 200 Window Panels are said to be sold separately, having a price tag of $13.00.

Images courtesy of Aerocool

QNAP Turbo NAS Sytems to Support Latest Red Drives From Western Digital

Geared for the 1-5 bay NAS market, Western Digital’s Red line of drives have certainly made an impact on the performance of small NAS systems for home and small business users alike. Since their initial release however, we have seen their capacity grow and even more recently we have seen the launch of a 2.5″ variant of the network storage designed drives.

Offered in capacities of up to 4TB in a 3.5″ format and 750GB or 1TB in a 2.5″ format, the Red drives offer up enhanced performance capabilities over standard desktop drives as well as better reliability for the data throughput that they are expected to handle.

With this update in both capacity and form factor, QNAP have announced that all of their latest Turbo NAS products will fully support these latest drives and older units too will support the drives with their firmware updates.

Taiwan’s Country Manager for Western Digital said in a statement “The drives are designed and extensively tested for compatibility in the unique 24×7 operating environment and demanding system requirements of home and small office NAS. Our exclusive NASware technology enables seamless integration, robust data protection and optimal performance for NAS and RAID environments.”

The latest Red drives are available to buy now online with the 4TB 3.5″ drive retailing for around £162 whilst the 750GB and 1TB 2.5″ will be on sale for around £60 and £85 respectively.

Source QNAP

Icy Dock FatCage MB155SP-B SATA Backplane Module Review

Introduction


When it comes to drive enclosures, both of the internal and external flavour, there is, generally speaking, one name that always pops to mind and this is Icy Dock. For many years now they have been creating enclosures, mounts and backplanes in a whole heap of varieties – some of which we’d never have thought were useful. The backplane that I’ll be looking at today is just one example of a product that I’d look through their catalogue, see and skip past as it doesn’t immediately jump out to me as a product that needs much attention.

For the vast majority of home users, having a server at home is not something that would really shout out as being needed and on the whole, they are not, but with media streaming and file sharing become more common, some users are making the move to build their own. Naturally the obvious path, rather than buying one, is to build a system from common desktop components, using a mid tower chassis to house everything, but many chassis only offer internal drive bays and there can be few at that. For those that are keen on keeping things backed up or who want easy access to their drives without having to open the case, having a backplane is a simple solution that gives flexibility of access whilst adding additional 3.5″ space.

The MS155SP-B that we’re looking at today is a simple, straight to the point backplane. By simply mounting into the optical drive area, this backplane gives five additional drive bays that can be individually removed from the system in a hot-swap manner with ease.

Anyone that has owned an Icy Dock product of this type or have read my past reviews on some of their products will know that they like to keep the packaging and extras down to a minimum, after all there’s no need for a heap of paperwork, leaflets and other non-vital parts that typically ends up staying in the box.