Thermaltake Core V71 Full Tower Chassis Review

by - 6 years ago

«»

Exterior


The chassis features a pretty aggressive design with thick black panels and heavy-duty metal mesh-work on the front and top panels. Down the left side you’ll find a huge side panel window with crystal clear perspex that gives an uncompromising view of the chassis interior, great for showing off your gaming rig.

DSC_5189

The right side panel is finished in powder black and features a large recess to allow extra cable routing space, handy if you’ve shoved a ton of spare cable behind your motherboard.

DSC_5191

The front panel is pretty monolithic in terms of aesthetics, although the camera flash is allowing you to see the front ventilation, it’s generally not that visible under normal lighting conditions. There are two 5.25″ covers at the top and a small metallic Tt logo near the bottom.

DSC_5192

The mesh is really nicely finished with plenty of ventilation for those vast radiator mounts and 200mm fans which reside behind it.

DSC_5190

Around the back you can see the top panel extends way above the top of the main chassis, providing extra room for fans and a full length top air filter. Below that you’ll find three rubber grommets, a 120/140mm fan mount, eight expansion slots and a bottom mounted PSU area with another slide out dust filter.

DSC_5194

All the dust filters on the chassis are easy to remove and cleaned, which will help with maintaining a clean airflow.

DSC_5195

The top panel features loads of ventilation with the main I/O panel located towards the front.

DSC_5199

On the left you’ll find the reset button, HDD LED, a two-speed fan toggle (high / low) and the FAN LED control. On the right are two USB 2.0, two USB 3.0 and HD audio jacks, finally you’ll find the master power button located in the centre.

DSC_5200

The underside features four very large and wide feet, perfect for providing a stable base for your heavy water-cooled system; you’ll also find four tough rubber grips on the base to prevent it sliding around and to also help reduce vibration from the system. Two large air filters cover the entire base of the chassis, one slides out from the back, the other front the front (after you pop off the front panel), allowing for quick and easy maintenance of the underside airflow.

DSC_5898

Article Index

  1. Introduction
  2. Exterior
  3. Interior
  4. Complete System
  5. Final Thoughts
  6. View All

Author Bio

Add a Comment

1 Comment on Thermaltake Core V71 Full Tower Chassis Review

  • Avatar Acidfix says:

    I would love this case. It is the first Thermaltake case I’ve seen in a while that I’ve loved! I love the big fans and air flow since I don’t use any water cooling. It’s also one if not the best looking case I’ve seen with that price point. If I could buy one now I would. But I’ll be getting one as my next tower. The filters are also nice and I love how open the case is.

    Great review and a great tower!

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES