Enermax Triathlor 700W Semi-Modular Power Supply Review

by - 7 years ago

«»

Cross Loading


Our cross loading procedure is designed to rigorously test the stability of the main two rail combinations. We push the maximum rated current and wattage through the 12 volt rail(s), and then through the 3.3 and 5 volt rails combined, and see if the power supply is capable of delivering its specification for those. However, meeting the specification is not enough, the power supply must also maintain strong voltage regulation and noise/ripple to have “passed the cross load test. 

The cross load test is a “worst case scenario” for the two main power delivery rail mechanisms (12v and 3.3+5v) and so the power supply will always deliver slightly lower than realistic/expected results. However, this is not necessarily a realistic test and it is just a case of pushing a power supply’s rails right to their rated limits to see how well they can hold up.

12 Volt Cross Loading

enermax_triathlor_700_12v_cl

Enermax T7 12 Volt CrossLoad

5 and 3.3 Volt Cross Loading

enermax_triathlor_700_5v_cl

Enermax T7 5 Volt CrossLoad

Enermax T7 3 Volt CrossLoad

Article Index

  1. Introduction
  2. Packaging and Contents
  3. A Closer Look - Exterior
  4. A Closer Look - Interior
  5. Test Procedure
  6. Voltage Regulation, Efficiency and PFC
  7. Noise/Ripple Testing
  8. Cross Loading
  9. Fan Speed
  10. Conclusion
  11. View All

Author Bio

Add a Comment

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES