Enermax MAXPRO 500w Power Supply Review

by - 5 years ago

«»

Ripple


Noise and Ripple can easily be measured by an oscilloscope. These show how much voltage fluctuation there is on a particular rail. We tested the rail stability of the 3.3 volt, 5 volt and 12 volt rails using an identical time and millivolt scale for all graphs. millivolt ripple is measured by the peak to peak size of the voltage curve.

sample_scalev2

Sample Ripple Graph

The latest ATX 12 volt version 2.3 specifications state that ripple from peak to peak must be no higher than 50 millivolts for the 3.3 volt and 5 volt rails, while the 12 volt rail is allowed up to 120 millivolts peak to peak to stay within specifications. Millivolt figures are stated to the closest increment of 5 given their variability.

Load (%) 3.3V Ripple 5V Ripple 12V Ripple
20  3.4  3.6  7.2
40  4.8  4.2  9.4
60  5.4  5  11.4
80  9.2  6  14.6
100  16.4  8.4  28

With the mixture of capacitors and the limited hardware inside this unit, I wasn’t expecting especially impressive results, but the MAXPRO knocked it out of the park here, with very impressive ripple suppression across all load scenarios.

3.3 volt @ 100%

3.3

5 volt @ 100%

5

12 volt @ 100%

12

Article Index

  1. Introduction
  2. A Closer Look - Exterior
  3. A Closer Look - Interior
  4. Test Procedure
  5. Efficiency, PFC and Voltage Regulation
  6. Ripple Testing
  7. OPP and Max Wattage
  8. Fan Speed
  9. Final Thoughts
  10. View All

Author Bio

Add a Comment

2 Comments on Enermax MAXPRO 500w Power Supply Review

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES