Cooler Master Hyper 212X CPU Cooler Review

by - 5 years ago

«»

Installation


Getting this cooler installed on your motherboard and CPU of choice couldn’t be much simpler. The universal backplate drops into place easily enough and is held in place by four screws (front side) and four bolts (back). This is easily done, as it can all be done tool-free, although a special screwdriver to bolt adaptor is included should you need to tighten them further.

DSC_5994

Here are the four screws as seen from the other side.

DSC_5996

The universal mounting X bar is adjustable to suit each socket type, simply apply thermal paste, put the cooler and mounting bar in place and screw the four corners down.

DSC_5998

Once fitted, you can see that there’s a lot of clearance around the main components of the motherboard, minimising the chance of component conflicts.

DSC_5999

There’s also zero chance of it causing compatibility issues with your RAM, thanks to the slim tower design.

DSC_6001

Article Index

  1. Introduction
  2. A Closer Look
  3. Installation
  4. Test System and Methodology
  5. Performance
  6. Final Thoughts
  7. View All

Author Bio

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES