Aerocool GT-S White Full Tower Chassis Review

by - 6 years ago

«»

Complete System


The whole build only took me twenty minutes to bolt together, there is a lot of space to work with on the interior of the GT-S and my test components clipped into place with ease.

DSC_3438

Cable routing is really good and all that space behind the motherboard made it easy to get a clean-looking final build. The PSU mount is perfect for our ATX PSU and it’ll no doubt benefit from the bottom air filter.

DSC_3439

The hard drive bays look great finished in blue and offer up plenty of room for airflow to keep the drives cool and let air through the bays to feed the rest of the system.

DSC_3440

I decided to remove the rear fan in favour of our Corsair H80i, which means I’m still able to use the 200mm fan mounted in the top of the case.

DSC_3443

The expansion card clams worked perfectly and it’s nice to see a solution that doesn’t involve using screws in small spaces.

DSC_3444

The cable routing grommets are cut into smaller panels so any passing cables don’t pull and distort the rest of the grommet, giving a much cleaner look overall.

DSC_3446

With the side panels back in place, as well as the magnetic 5.25″ drive bay cover, the GT-S looks incredible, it certainly has presence!

DSC_3448

The clear side panel window gives an unspoilt view of the chassis interior and while you could install 120mm or 140mm or even a 200mm fan here, it would be a shame to spoil the view.

DSC_3449

Hit the power button and the soft blue lighting shines through the top mesh, bathes the interior in a cool glow and of course lights up those four extra LED lights on the front panel.

DSC_3453

Article Index

  1. Introduction
  2. Exterior
  3. Interior
  4. Complete System
  5. Final Thoughts
  6. View All

Author Bio

Add a Comment

1 Comment on Aerocool GT-S White Full Tower Chassis Review

  • marty1480 says:

    Looks like a really nice case. But I just wish Aerocool would stop putting slotted fan mount points on their side Windows. It is just an entry point for dust that is hard to filter out and on the top one it is impossible to mount a fan if your are using a 120mm / 140mm closed loop water cooling solution that is mounted on the rear.

Related Posts

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES

0 SHARES